Listen up vendors - here's what I want
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Listen up vendors - here's what I want
The gauge arrangement on this vehicle is poor and incomplete (especially with the lack of a boost gauge).
I would be willing to pay $500 - $750 for an electronic display that connected through the ODB port that let me monitor engine vitals. It would be similar to the Corvette driver information center( DIC). The idea would be a display with a button to cycle through various engine paramters, boost, oil temp, and other OBD monitored functions. There would be no mechanical installation - simply monitoring through the existing OBD electronics.
Maybe the device would be installed in place of the existing clock or maybe in the DIN panel used for radio/CD installations. The DIN idea might be best because vendors would be making something they could easily sell for other vehicles, after all every imported car has a standard DIN opening.
I would be willing to pay $500 - $750 for an electronic display that connected through the ODB port that let me monitor engine vitals. It would be similar to the Corvette driver information center( DIC). The idea would be a display with a button to cycle through various engine paramters, boost, oil temp, and other OBD monitored functions. There would be no mechanical installation - simply monitoring through the existing OBD electronics.
Maybe the device would be installed in place of the existing clock or maybe in the DIN panel used for radio/CD installations. The DIN idea might be best because vendors would be making something they could easily sell for other vehicles, after all every imported car has a standard DIN opening.
#3
Evolving Member
iTrader: (3)
Join Date: Jan 2003
Location: Calabasas CA
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
That's just a Stack 8100 system. No need to get it froM SARD. Problem is you have to wire up all the sensors you want to have a reading from and install the sensors. It doesn't use the stock sensors and wiring.
#4
here's something close http://www.psi3.co.uk/products.html
available through http://www.quantum-racing.com
available through http://www.quantum-racing.com
Last edited by n00dle; Aug 7, 2003 at 11:53 AM.
#5
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info
This is exactly what I am looking for. Thanks for the info.
It looks like their units are designed for Subarus but I have sent them an email to see if they make something for the EVO.
It looks like their units are designed for Subarus but I have sent them an email to see if they make something for the EVO.
Thread
Thread Starter
Forum
Replies
Last Post
Kami Speed
EvoX 'For Sale' Electronics / Lighting / Audio
9
Feb 20, 2010 03:55 PM