ohthree

iTrader: (1)

Does anyone have a clue on how to remove the back outside door handles or a walkthrough on how to do it? On the 8, the childlock is right in the way of the back bolt that you must undo to get it off. I managed to lock one of my doors shut because I tampered with the childlock. Has anyone removed the back outside door handles and have any tips on how to get to that back bolt? There is a big O that you access it through the metal to get to it, which when you open it, the white childlock si right in the way. I was considering maybe drilling a few extra holes in the metal to get to it.

Give me your advice or knowledge please! Thanks.

Tom.

ohthree

iTrader: (1)

bump.

JDMCT9MR

iTrader: (56)

Not quite what you are looking for but hopefully it will help.

https://www.evolutionm.net/forums/sh...g+door+handles

ohthree

iTrader: (1)

I removed the panels all fine, the problem is there is sheet metal in between the screw on the handle.

<a href="https://www.evolutionm.net/forums/attachment.php?attachmentid=101518&d=1169454113" target="_blank"><img src="http://i35.photobucket.com/albums/d183/thomashacker/Picture3-1.png" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

ohthree

iTrader: (1)

bump.

PHDoc19

iTrader: (9)

Three large phillips screws on the lock itself, take them out and move it out of the way, and then you can access that back bolt.

ohthree

iTrader: (1)

thanks, i'll try to do that.

ohthree

iTrader: (1)

Resurrecting a dead topic but... where the heck are these three screws on the lock itself?