Fast-Mover

iTrader: (15)

Ok so i got the JDM Evo 9 MR Lights and switched over the HID kit and the high-beam bulbs, But the fog lights dont fit into the ports, Also theres no motor's on the lights,

Do i have to get new fog-light bulbs?, i have the new harness.

Is there somehow i can switch the new JDMs to use the motor's so i can adjust the lights.

Thanks

JDMCT9MR

iTrader: (56)

The JDM lights use a 9006 foglight bulb so you will need to get a noyka harness adapter. I think you can swap the OEM usdm IX ones over.

Boost3dxEvO

iTrader: (135)

Why do you think you got new harnesses ??? You can't use the stock fog bulbs.. they are H11's.. the JDM's take a 9006.. that's why you have to cut the stock fog harness off and splice in the new harness to convert to 9006..

Fast-Mover

iTrader: (15)

I bought the new harness adapter from lancershop.com, was told that i need it, SO i will need to get new fog light bulbs correct? Also Any word on the motor for the adjusting or is it a no go.

Fast-Mover

iTrader: (15)

What im saying about the bulbs is that they DONT even fit into the actual housing.

JDMCT9MR

iTrader: (56)

Yes you will need new 9006 bulbs for the foglights. I would say the only way to know if the headlight leveler motor will work or not is to try to swap it over. My JDM headlights came with new motors on them so Im not 100% sure.

Fast-Mover

iTrader: (15)

Can i pick the bulbs up at a local Autozone?

Boost3dxEvO

iTrader: (135)

yes... just get a basic 9006 bulb...

JDMCT9MR

iTrader: (56)

You sure can.

Fast-Mover

iTrader: (15)

Good to go thanks for the reply's