Is there anything left to do??
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: ohio
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Is there anything left to do??
I just sold my evo and am hopefully picking up this one next week. I'm guessing 650whp will keep me entertained for a long time. But IF i get bored what else is there left to do besides a bigger turbo or race gas that will actually make some power?? I plan on having it tuned for 93oct. Here are current mods.
626/598 awhp/awtq
This was at 34psi, with 91/meth injection
Full 2.4L RNR built engine with about 13K on it. (replaced at 33k)
Crower rods
Ross Pistons
New Stroker Crank
New 4G64 Block
Mitsu Main & Rod bearings
New Front Cover
New timing belt
New Tensioner
Head has a mild port with a 3 angle
HKS 272's
Mitsu Metal Head gasket
Turbo:
Full Shearer GT37R kit
Full 3" TB exhuast
Tial BOV
Buschur Race FMIC
AMS 1200HP fuel kit
Methanol Injection
4" Intake
Full AEM setup Tuned by Shawn Ivey
AEM Wideband
AEM Serial data stream guage
Exedy Triple Carbon Clutch
Fidanza Flywheel
Misc:
Koyo Aluminium radiator
Slotted/dimpled rotors
Metal master pads
Battery is relocated to the trunk
Pioneer head unit
DEFI Boost Guage
Hallman MBC
Perrin Rear Sway bar
Ebiach Lowering springs
All solid motor mounts
HKS turbo timer
626/598 awhp/awtq
This was at 34psi, with 91/meth injection
Full 2.4L RNR built engine with about 13K on it. (replaced at 33k)
Crower rods
Ross Pistons
New Stroker Crank
New 4G64 Block
Mitsu Main & Rod bearings
New Front Cover
New timing belt
New Tensioner
Head has a mild port with a 3 angle
HKS 272's
Mitsu Metal Head gasket
Turbo:
Full Shearer GT37R kit
Full 3" TB exhuast
Tial BOV
Buschur Race FMIC
AMS 1200HP fuel kit
Methanol Injection
4" Intake
Full AEM setup Tuned by Shawn Ivey
AEM Wideband
AEM Serial data stream guage
Exedy Triple Carbon Clutch
Fidanza Flywheel
Misc:
Koyo Aluminium radiator
Slotted/dimpled rotors
Metal master pads
Battery is relocated to the trunk
Pioneer head unit
DEFI Boost Guage
Hallman MBC
Perrin Rear Sway bar
Ebiach Lowering springs
All solid motor mounts
HKS turbo timer
#2
Evolving Member
i recommend getting the axles, transfer case, and transmission upgraded for a car puttn down that much power, cause those components arent gonna last that long if they havnt already been changed out
#5
Evolved Member
iTrader: (9)
Join Date: Jan 2008
Location: Mass
Posts: 971
Likes: 0
Received 0 Likes
on
0 Posts
depends. you gotta talk to the guys at shep. u could get a built t case adn tranny, or take urs out and send them to be re-built. as far as axles somebody else will have to chime in or u gotta do some searching. company's like ams or br could let u know wat to get
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lasersleeper
For Sale - Cars For Sale
10
Aug 14, 2008 10:04 PM