Roll cage time, HELP, dont know what to do
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: nh
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Roll cage time, HELP, dont know what to do
So last time i went to the track i ran an 11.4@ 125mph. Time to get a roll cage because the car will only get faster from here
my problem is, i dont know how to go about getting a roll cage, and i cant weld so making one on my own is out of the question
can someone help me out please?
my problem is, i dont know how to go about getting a roll cage, and i cant weld so making one on my own is out of the question
can someone help me out please?
#3
Evolved Member
Join Date: Apr 2006
Location: In Between Mexico And Canada
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
autopower makes bolt in and weld in cages. otherwise a race shop with a tubing bender can do it. If you have more money than time. just drop the car off somewhere and have them deal with it. Otherwise strip the car yourself if you want a full on cage. but you need to decide how fast you want to go and make sure they build it within spec for what time you want to be certified too
#4
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: nh
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
autopower makes bolt in and weld in cages. otherwise a race shop with a tubing bender can do it. If you have more money than time. just drop the car off somewhere and have them deal with it. Otherwise strip the car yourself if you want a full on cage. but you need to decide how fast you want to go and make sure they build it within spec for what time you want to be certified too
#7
Evolved Member
Join Date: Apr 2006
Location: In Between Mexico And Canada
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
well any cage built by anybody who's seen a cage will have a harness bar tied into the main hoop. Im unfamiliar with whos around NH. Isnt turbotrix up there?? I would check with them if they dont build cages they know who will
Trending Topics
#9
Evolved Member
Join Date: Apr 2006
Location: In Between Mexico And Canada
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
I would be worried about those cages just for wall thickness. This would have to pass tech which requires them drilling into the cage and measuring the actual gauge. But good tip either way. For that price i would just spring for something known like autopower
#11
Evolved Member
Join Date: Apr 2006
Location: In Between Mexico And Canada
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
If i was you. and needed a cage, i would drop it off at dentsport
http://www.dentsport.com/services/fabrication/
http://www.dentsport.com/services/fabrication/