JDM EVO VIII heads into a EVO IX GSR
#1
Evolving Member
Thread Starter
iTrader: (6)
Join Date: Apr 2008
Location: New Jersey
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
JDM EVO VIII heads into a EVO IX GSR
Hello everybody, well i tried to do the necessary research about this before i actually posted but i cant come up with any since i have this problem and hopefully someone out there can help me out. So here's my dilemma: i just bought a pair of JDM EVO VIII headlights from another member here (very nice guy) so i can have them installed in my EVO IX GSR, the issue is that my GSR was non-hid and non-foglights, so the new JDM headlights came with manufacturer hids, fogs and leveling motors (or what i think are leveling motors since its the first time i see one of these up close and personal) but not switches. As i tried to install them yesterday i realized that the main socket from the JDM heads was not the same as the one for the GSR which brings me to my biggest question: how exactly am i going to make this work??? i really dont care for the leveling motors to work right away (until i get the actually leveling switches that go in the dash)
As of right now i dont know what to do so any feedback/direction/tips on how to do this would be highly appreciated. Thank you very much
As of right now i dont know what to do so any feedback/direction/tips on how to do this would be highly appreciated. Thank you very much
#2
Evolved Member
iTrader: (19)
Join Date: Jun 2007
Location: VA or NY
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
https://www.evolutionm.net/forums/ev...id-w-fogs.html
this is the how to on the forums...hope this helps
this is the how to on the forums...hope this helps