Pic of underbody of an evo8/9
#1
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Jan 2009
Location: bristow
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Pic of underbody of an evo8/9
Does anyone have a picture of their car taken from the underside, im building some alluminum paneling and need to draw out the design for it.
#2
Evolved Member
iTrader: (19)
Wouldn't it just be easier to go for the Beatrush aluminum under panel? Sorry, I mean I hope you make it and it all works out, but after all that aggravation of drilling the holes to specs and making it liveable so you can actually service the car (i.e. get to the tranny/tcase, oil, etc...) I would just go with something that is tried and true. Like I said, I hope it works out and you can make one, but its just something to consider... If you still don't have a picture at the end of the day PM me and ill jack mine up and take one for you, the underpanel is off until the Beatrush one goes on later this week. I will put my panel on and take a pic before I do it for you. Again, good luck with it.
#3
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Jan 2009
Location: bristow
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
oh yea i appreciate the info, but i was going to do the hole thing, nose to tail- i love the beatrush, since Redline is allowing it for street class i was going to take advantage, i have to get the beatrush then do the rest i will/ deff keeping it in the back of my head.
Trending Topics
#11
Evolved Member
iTrader: (17)
There is a thread, I believe by a user called "binary01" (or something similar), where he used aluminum and made the underbody super smooth and very aerodynamic.
Search around, you'll find it.
EDIT - Here, I did the work for you.
https://www.evolutionm.net/forums/ev...rtray-evo.html
Search around, you'll find it.
EDIT - Here, I did the work for you.
https://www.evolutionm.net/forums/ev...rtray-evo.html
Last edited by Evo_Jay; Nov 24, 2009 at 09:18 PM. Reason: added link