Fit ebay lip in evo 8??
#1
Evolving Member
Thread Starter
Join Date: Aug 2007
Location: Barcelona
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Fit ebay lip in evo 8??
This lips fits good in evo 8?? Is plug and play?? Thanks!
http://cgi.ebay.com/ebaymotors/03-05...Q5fAccessories
http://cgi.ebay.com/ebaymotors/03-05...Q5fAccessories
http://cgi.ebay.com/ebaymotors/03-05...Q5fAccessories
http://cgi.ebay.com/ebaymotors/03-05...Q5fAccessories
http://cgi.ebay.com/ebaymotors/03-05...Q5fAccessories
http://cgi.ebay.com/ebaymotors/03-05...Q5fAccessories
#5
Evolved Member
iTrader: (23)
no...the stock bumper has holes at the bottom where the lip attaches...you will see it when you take your bumper off and remove the factory lip...
just unscrew your factory lip, line up the new lip to the holes and drill small holes in the new lip so its easier to screw the lip to the bumper...
just unscrew your factory lip, line up the new lip to the holes and drill small holes in the new lip so its easier to screw the lip to the bumper...
Trending Topics
#10
Newbie
iTrader: (6)
Join Date: Jul 2009
Location: Parker, CO
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I just put that same lip on my car the other day. Can't say it was the same seller because there are tons of people selling it all over Ebay. But I would say fitment was a 9 out of 10. One hole on the side of the lip didn't match up so I had to do some engineering......
#12
Evolving Member
Thread Starter
Join Date: Aug 2007
Location: Barcelona
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
I just put that same lip on my car the other day. Can't say it was the same seller because there are tons of people selling it all over Ebay. But I would say fitment was a 9 out of 10. One hole on the side of the lip didn't match up so I had to do some engineering......
Your engineering drilled the bumper is visible this hole when fit other day the stock lip?
#13
Evolving Member
iTrader: (23)
Join Date: Apr 2008
Location: longisland ny
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
i have same lip to, but bought it from a different seller after i broke my cf lip. fitment is not easy. drilling and sanding is required to make it fit properly. bumper must be taken out to make it fit properly.