20austin08

iTrader: (5)

aww. My fault didnt see you were in Australia. I dont know how the hardware game is there. Before trying anything else extreme I would definately just try to find the parts to make a BL tester. My family owns a hardware store so I took advantage of the supplies. Sorry I can't be of more help i'm not 100% sure about the cam sensors.

widge

I tried to start the car with the cam angle sensor unplugged, this made no difference, i would think if it was working and i unplugged it things would get worse?

I really want to do a BL test but i think im going to have to fab something up with alloy

widge

Changed the CAS still same issue

cfdfireman1

iTrader: (11)

plugs they're probably wet by now.

Evoryder

iTrader: (55)

Get a real code scanner. If you toasted your CAS your codes should P0113 and one for the CAS.

You don't have major hardware store where you live? Here's another thread on what's needed. I find it hard to believe you couldn't source...
https://www.evolutionm.net/forums/ev...er-5-02-a.html

Evoryder

iTrader: (55)

Also does the car crank but not catch or just clicks?

Evoryder

iTrader: (55)

Crank ANgle Sensor

High_PSI

iTrader: (50)

What a compelling mystery! I am totally stumped. Maybe it needs gas

widge

LOL i wish it just needed fuel.

It could be crank angle sensor its really the only thing left

Evoryder

iTrader: (55)

So did you pull the codes yet? And don't day you used Evoscan

widge

Not yet im trying to get a hold of my mate who owns a mechanic shop and he has a Scan Tool a proper one.

widge

so i have been unable to get the car to start for a day or so, and re-checked spark, 2 and 3 are getting spark and 1 and 4 arent.

Changed over the coil packs and its still the same 1 and 4 dont spark.

Still trying to get a scan tool any suggestions? Crank Sensor?

widge

Going out now to check if the Balance Shaft Belt has snapped which i have read will damage the crank sensor causing the issue im having

widge

Can someone give me a hand by logging there car with Evoscan and log the Crank Signal, when i log the crank signal from my car the value doesnt change from 0, i believe this value should be changing between 0 and 1

widge

https://www.evolutionm.net/forums/ev...5-p0340-2.html

https://www.evolutionm.net/forums/ev...ad-dead-3.html

https://www.evolutionm.net/forums/ev...t-start-3.html

These threads show the issues im having im going to try a new Crank Angle Sensor, consider my car doesnt get spark on 1 and 2 anymore