EvoIX505

iTrader: (3)

Hey guys I ***d up wat looks like the piece of the t case where the motor mount bolts on. The bolt is there but the top part broke wat can I do to fix it? Is there any way or do I need a new t case to be able to screw that bolt back on... it happened racing when I switched from 1st to 2nd gear. Any help is appreciated thanks

The-Evo

iTrader: (20)

Do you have pics?

EvoIX505

iTrader: (3)

I don't its kind of hard to see its the motor mount that's undr the intake manifold the first top screw and everything is loose

EvoIX505

iTrader: (3)

Bump

EVO8STI

iTrader: (2)

im 100% sure there is no motor mount on the t case. the t case bolts up to the tranny with 6 bolts and thats the only thing holding it. there is a mount on the back of the tranny, and if you broke that it can just be replaced. pics would be very helpful btw

EvoIX505

iTrader: (3)

Yeah im pretty sure thats the one. the thing is that the mount is ok what broke is where the bolt from the mount screws in that is part of the tranny then

MRolla

iTrader: (34)

if you snap a bolt in there or you broke where the bolt bolts into to if you snap the bolt in there you can always get someone to drill it out and retap the treads if you broke the case it self sounds like you will need a new tranny case

EVO8STI

iTrader: (2)

hmm starting to sound expensive..

06mr775

iTrader: (8)

The rear mount actually is bolted to the transmission...there is 2 pieces a black one which bolts to the trans and a aluminum one which bolts to it and has a hole in the center.

tscompusa2

iTrader: (22)

there is no motor mount on the transfer case. theres a motor mount bracket on the rear of the transmission though. the evo only has 4 mounts.

rear roll stopper ( engine/trans mount)
front roll stopper (engine/trans mount)
pass side engine mount
driver side engine mount (that bolts to the top of trans)

I highly doubt you damaged the black bracket behind the trans, as its strong as hell, so im guessing you damaged the actual rubber mount..

The bracket is the only thing bolted to the trans, the actual mount is bolted to the vehicle. I'll get you a picture of it here in a minute.

tscompusa2

iTrader: (22)

was it the bracket or the mount? i can get you any part # you need if you tell me what part it is.

EvoIX505

iTrader: (3)

how do i post pics?

tscompusa2

iTrader: (22)

you need to upload the pic to tinypic.com and then put the url from tinypic inbetween the thing here: where test is put the url. [IMG]test[/IMG]