Car cranks, but won't start, .... adivce?
#1
Car cranks, but won't start, .... adivce?
Running on AEM Ems and weather is about -15c. I had a little trouble starting the car about a month ago so i took it to the tuner and got it touched up. Worked fine.
Wednesday i drove the car, and everything was fine. Yesturday morning i tried to start the car, and no go (won't start today either).
It cranks, but doesn't start. I thought maybe something with spark plugs, pulled each out, and seem fine. I thought maybe its the Spoolin kit, and replaced it w/ stock coil, still nothing.
Thought maybe its the fuel pump but i hear it prime when i turn the key in the on position... friend mentioned for me to check LICP, but everything looks good...
Whats next?
I made a log while startup and have aem tune on file if anyone can help.
-dj
Wednesday i drove the car, and everything was fine. Yesturday morning i tried to start the car, and no go (won't start today either).
It cranks, but doesn't start. I thought maybe something with spark plugs, pulled each out, and seem fine. I thought maybe its the Spoolin kit, and replaced it w/ stock coil, still nothing.
Thought maybe its the fuel pump but i hear it prime when i turn the key in the on position... friend mentioned for me to check LICP, but everything looks good...
Whats next?
I made a log while startup and have aem tune on file if anyone can help.
-dj
Last edited by ezzey; Jan 7, 2011 at 01:37 PM.
#2
Evolved Member
iTrader: (3)
Running on AEM Ems and weather is about -15c. I had a little trouble starting the car about a month ago so i took it to the tuner and got it touched up. Worked fine.
Wednesday i drove the car, and everything was fine. Yesturday morning i tried to start the car, and no go (won't start today either).
It cranks, but doesn't start. I thought maybe something with spark plugs, pulled each out, and seem fine. I thought maybe its the Spoolin kit, and replaced it w/ stock coil, still nothing.
Whats next?
I made a log while startup and have aem tune on file if anyone can help.
-dj
Wednesday i drove the car, and everything was fine. Yesturday morning i tried to start the car, and no go (won't start today either).
It cranks, but doesn't start. I thought maybe something with spark plugs, pulled each out, and seem fine. I thought maybe its the Spoolin kit, and replaced it w/ stock coil, still nothing.
Whats next?
I made a log while startup and have aem tune on file if anyone can help.
-dj
#4
Evolved Member
iTrader: (17)
i dont think you can hear the fuel pump prime just by turning the key.
check the obvious
spark
fuel
compression
pull out a sparkplug wire out and hold it next to the valve cover while cranking. if you see spark arching out to the valve cover, then you have spark. move on to fuel
make sure you are getting fuel into the chamber. if you are, move to compression test
check the obvious
spark
fuel
compression
pull out a sparkplug wire out and hold it next to the valve cover while cranking. if you see spark arching out to the valve cover, then you have spark. move on to fuel
make sure you are getting fuel into the chamber. if you are, move to compression test
#6
i dont think you can hear the fuel pump prime just by turning the key.
check the obvious
spark
fuel
compression
pull out a sparkplug wire out and hold it next to the valve cover while cranking. if you see spark arching out to the valve cover, then you have spark. move on to fuel
make sure you are getting fuel into the chamber. if you are, move to compression test
check the obvious
spark
fuel
compression
pull out a sparkplug wire out and hold it next to the valve cover while cranking. if you see spark arching out to the valve cover, then you have spark. move on to fuel
make sure you are getting fuel into the chamber. if you are, move to compression test
I smell fuel, so i know im getting fuel, and compressoin SHOULD be good since cars been running fine, and only rebuilt about 5000miles ago.
Ill check the spark plugs again, and gonna log crank and cam while cranking the engine and see if it picks up a signal.
and yes, AEM seems to not like cold weather ;/ . Even thou it may be the AEM, there must be something i can do to get my car running. Just gotta figure out what, sigh.
I may go back to stock ecu in the "near" future.
Trending Topics
#8
Evolving Member
Join Date: Dec 2009
Location: pensacola
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
crank sensor? it happened to me, i was just cruising and mine went out!!!! crazy for 38k miles i know but who knows.... machines aren't perfect my pulley backed out and i've never taken anything or loosened anything on that side of the motor
#10
Evolved Member
iTrader: (17)
check for spark first before you buy new plugs. you might not need them. if you can narrow it down to spark or fuel, you can go from there and figure out what is causing it to not function properly.
#13
Newbie
iTrader: (13)
Join Date: Jul 2010
Location: CA
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Like someone above suggested, try pulling up a coil and hold it next to the valve cover while someone cranks the car. You should see it arc. If you don't see it arc then you have a problem with the ignition system somewhere. Also you may want to swap your crank position sensor out with a different one. My cam position sensor went out and it looked like it was working properly while logging it with ems but it ended up being bad.
#15
Mine sort had the same problem a few weeks ago. If you have fuel (check by pulling the fuel line and crank the car it should start squirting fuel) and checked all your fuses (even the one under the steering wheel where your ignition coil fuse is located). If all that is good, then it could be your immobilizer.