Hey all,
I just picked up an Injen intake and was curious how I would run my BOV (evo9 bov) using this intake and my BR UICP. Any pics would be greatly appreciated! Thanks

here's a pic of my setup and I think the injen intake has the bov hose route back to the side closest to the radiator. Trying to figure out how this will work.

 

I'm running it the best thing to do is go to advance or auto zone and get a preformed U-bend coolent hose. That's what I did works great

 

Also mount the bov to the uicp not to the intake

 

you mean mount it closer? My UICP doesn't have a flange on it, but the rubber hose runs to the bottom of the bov and blows off into the intake. I bought it like that. Kinda ghetto but its working so far. Maybe's its good time to dump the evo9 bov and do something else.

 

I guess you don't really need to mount it to the uicp but I just cut a little peice of the hose and mounted it that way it made it a little easier.

 

Here's what it looks with the Injen intake installed. I like the look of this intake the best compared to others (just preference). It sits level for the most part and out of the engine area where alot of heat is. I was able to get the bov to tuck nicely under the intake with a extra radiator hose with some bends in it. The blow-off sound is much louder now too. Now just got to get a polished upper coolant pipe and battery hold down.

 

Dude, what battery is that? ^
Are you using stock battery tray?

 

I was going to look at that next. Dont remember what it is called. Cant make it out from the picture either. It sits in its own little metal box and is bolted down. I was going to see what it will need for a batter tie down. I'll let you know tomorrow. The car starts great with that battery..so I'm happy