Lightweight Front Bumper Beam
#1
Lightweight Front Bumper Beam
http://oswaldperformance.com/IMPREZA...UMPERBEAM.aspx
Anything like this going on for the Evo? I'm running the demonwerkz in the back which is way lighter than stock but I couldn't find anything for the front.. JDM evos don't even run a crash beam in the front, I'm sure it makes a fairly significant difference in handling...
should drop about 20 pounds off the very front of the car
Anything like this going on for the Evo? I'm running the demonwerkz in the back which is way lighter than stock but I couldn't find anything for the front.. JDM evos don't even run a crash beam in the front, I'm sure it makes a fairly significant difference in handling...
should drop about 20 pounds off the very front of the car
Last edited by kyoo; Apr 5, 2011 at 09:05 AM.
#2
bump for any interest in this? the guys willing to make the part if he can find an evo to test fitment on near Tuscon, AZ
We can expect that, similarly for the evo, this mod will drop at least 20 pounds from the front end while keeping the safety (and insurance benefits) of having a front crash beam
We can expect that, similarly for the evo, this mod will drop at least 20 pounds from the front end while keeping the safety (and insurance benefits) of having a front crash beam
#4
Actually I'm not at all - good call. In any case, this bumper beam would still weigh only 6 pounds, which can be considered a fairly significant saving from our heavy front end, especially so far in the front. I imagine auto-xers would particularly be interested in the product, since I'm expecting the price to be fairly similar to what he charges for the Impreza.
Trending Topics
#10
Evolved Member
iTrader: (25)
Join Date: Dec 2004
Location: Mussolini's back yard
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Wow, then I stand corrected. It's been awhile since I removed the front one, and I would have bet (and lost obviously!) that it was 20 pounds.
Call me crazy, but I would still buy an aluminum beam to shave the weight by half.
Depending on the price of course.
Call me crazy, but I would still buy an aluminum beam to shave the weight by half.
Depending on the price of course.
#12
http://www.streettunedmotorsports.co..._crash_bar.htm
i'll probably try this out, hopefully fitment works well etc.
Thread
Thread Starter
Forum
Replies
Last Post
tiesto14
Evo X Electrical / Audio / Security
14
May 19, 2016 08:52 PM