AMS coupler question?
Aug 23, 2011, 08:52 AM
#1
AMS coupler question?
It's a long shot, but does anyone know the specific reducer coupler size I need from the LICP to the Turbo and also the Throttle body to the UICP. Both UICP and LICP are AMS. I purchased the kit on here and unfortunately wasn't sent all the equipment I was told I would receive. I am tired of trying to work a resolution and rather just purchase what I need. Any information on the size of these couplers would be great. Also it is the Street AMS Core and Short Route UICP and standard LICP. Thanks again 
Aug 23, 2011, 09:06 AM
#2
Evolved Member
iTrader: (11)
Join Date: May 2003
Location: Holding over the VOR
Posts: 1,263
Likes: 0
Received 5 Likes
on
4 Posts
You should be able to just measure this no?
If not, I can at least measure the turbine outlet size and the TB inlet size when I get out of work in about 8 hours... I don't have an AMS pipe though.
If not, I can at least measure the turbine outlet size and the TB inlet size when I get out of work in about 8 hours... I don't have an AMS pipe though.
Aug 23, 2011, 09:11 AM
#3
I have the piping getting powder coated currently, and I guess the only real number I need is the turbine outlet size. I can call and see what the tip of the LICP is and the Throttle Body. I was just hoping someone knew it off the top of there head so I can just go pick some up at Jegs.
Aug 23, 2011, 09:20 AM
#5
It's a long shot, but does anyone know the specific reducer coupler size I need from the LICP to the Turbo and also the Throttle body to the UICP. Both UICP and LICP are AMS. I purchased the kit on here and unfortunately wasn't sent all the equipment I was told I would receive. I am tired of trying to work a resolution and rather just purchase what I need. Any information on the size of these couplers would be great. Also it is the Street AMS Core and Short Route UICP and standard LICP. Thanks again
The silicon reducer at the upper IC pipe to the throttle body is 2.75"-2.5".
The silicone reducer from the lower IC pipe to the outlet of the turbo is 2"- 1.75".
I hope this information helps you. Also please let me know if you have any trouble finding these as we can sell them to you separately.
Thanks
Aug 23, 2011, 09:23 AM
#6
Turbo to LICP: 2.0" to 1.5" reducer http://cgi.ebay.com/ebaymotors/2-0-1...ht_2124wt_1165
UICP to TB: 2.75" to 2.5"
^^Ninja'd by andrew
UICP to TB: 2.75" to 2.5"
^^Ninja'd by andrew
Last edited by ErikB; Aug 23, 2011 at 09:26 AM.
Aug 23, 2011, 10:29 AM
#7
Hey,
The silicon reducer at the upper IC pipe to the throttle body is 2.75"-2.5".
The silicone reducer from the lower IC pipe to the outlet of the turbo is 2"- 1.75".
I hope this information helps you. Also please let me know if you have any trouble finding these as we can sell them to you separately.
Thanks
The silicon reducer at the upper IC pipe to the throttle body is 2.75"-2.5".
The silicone reducer from the lower IC pipe to the outlet of the turbo is 2"- 1.75".
I hope this information helps you. Also please let me know if you have any trouble finding these as we can sell them to you separately.
Thanks
I greatly appreciate it, and I hope to be in touch soon to purchase a few go fast goodies from you guys!
Thread
Thread Starter
Forum
Replies
Last Post
SharkyPR
09+ Ralliart Engine/Turbo/Drivetrain
3
Jun 28, 2016 08:43 AM
