Noob question, sorry :/
#3
this is what i got quoted with a tune.. let me know what you all think if its a decent price..
http://imageshack.us/photo/my-images/836/quotead.jpg
http://imageshack.us/photo/my-images/836/quotead.jpg
#4
Evolving Member
iTrader: (12)
Join Date: Jul 2009
Location: LI NY
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
this is what i got quoted with a tune.. let me know what you all think if its a decent price..
http://imageshack.us/photo/my-images/836/quotead.jpg
http://imageshack.us/photo/my-images/836/quotead.jpg
#7
I paid about $1300.. so you price is not too far off.. good deal on the tune..
Description Qty Cost Total
FIC BlueMAX 1350cc Injectors EVO - $279.74
40 Amp Boost-A-Pump - $275.95
Custom Evo E85 Dyno Tune Reflash, Drain tank, fill with E85 - $350.00
Modify Walbro 255HP fuel pump that is in the car already, install
KB Boost-A-Pump, install 1250cc fuel injectors - $325.00
$1,271.11
Description Qty Cost Total
FIC BlueMAX 1350cc Injectors EVO - $279.74
40 Amp Boost-A-Pump - $275.95
Custom Evo E85 Dyno Tune Reflash, Drain tank, fill with E85 - $350.00
Modify Walbro 255HP fuel pump that is in the car already, install
KB Boost-A-Pump, install 1250cc fuel injectors - $325.00
$1,271.11
Trending Topics
#13
Evolved Member
iTrader: (28)
Fuel pump is about an hour install...1.5 if you've never done it before but are somewhat handy with tools.
Injector install is about an hour install...if you've never done it just be careful not to lose the spacers or crimp an o-ring. Prices aren't bad but if you're handy you could do it yourself.
Why is the install so much on the three port? It's one bolt and two vac lines...unless it isn't a plug and play type and they have to solder lines and such.
Injector install is about an hour install...if you've never done it just be careful not to lose the spacers or crimp an o-ring. Prices aren't bad but if you're handy you could do it yourself.
Why is the install so much on the three port? It's one bolt and two vac lines...unless it isn't a plug and play type and they have to solder lines and such.