Gauge/Radio wiring help
#1
Gauge/Radio wiring help
While wiring my Prosport gauges...(which I clearly messed up) I wanted to test the power source so I grounded the gauges... touched the power to the radio clip's power and they worked for as long as I held it, then I tried one more time to confirm and heard a small pop(blown fuse) and the gauges no longer worked... My radio doesnt work now either... I checked my fuse panel and couldnt find a blown fuse there. any suggestions? dash is currently apart...
My owners manual fuse setups look completely different then fuse panels themselves so I dont know which is which...
Any suggestions would be greatly appreciated!
Fixed... the dome light of all thigns in the engine bay fuse panel (in the yellow clip) was the problem. everything works now.
My owners manual fuse setups look completely different then fuse panels themselves so I dont know which is which...
Any suggestions would be greatly appreciated!
Fixed... the dome light of all thigns in the engine bay fuse panel (in the yellow clip) was the problem. everything works now.
Last edited by Pssst; Feb 6, 2012 at 11:01 AM.
#3
Checked each fuse twice, nothing, all were in tact
I tried finding one on the wire but no luck. I took a volt meter to the radio RED going to the clip, its getting power... the orange(illumination?) is not getting any power. Nor is the yellow(constant)
Also my clock doesnt work Nothing but my A/F Gauge and boost gauge work whenever I have the car turned on ACC. no door chime nothing... eeek
Thread
Thread Starter
Forum
Replies
Last Post
dmik
Lancer Troubleshooting
12
Nov 20, 2021 10:12 PM
SatsuMX
Lancer Troubleshooting
2
Feb 22, 2016 09:38 AM
llDemonll
Pacific Northwest
11
May 22, 2012 02:35 PM