Installing Sparco Pro 2000 plus seats in an Evo 9
#1
Installing Sparco Pro 2000 plus seats in an Evo 9
Hey just picked up a pair of these and needed some help with installing them. They didn't come with instructions from Sparco.
The sliders and brackets line up 100%, but when I try to put the sliders onto the seats, they don't line up correctly. The part numbers are 100% correct for what I need.
Does anyone have any experience/ know anyone with experience with putting these in a 9?
Thanks
The sliders and brackets line up 100%, but when I try to put the sliders onto the seats, they don't line up correctly. The part numbers are 100% correct for what I need.
Does anyone have any experience/ know anyone with experience with putting these in a 9?
Thanks
#3
Keep looking at it. I took the stock seats out and had to get the sliders lined up just right with the seat to get it back in properly. Hopefully it is some adjustment or positioning issue. GL
#5
did u try to leave the brackets a bit loose on the seats so u can get them in then tighten them up? and after you do so if it binds you might have to remount. When putting after maket seats in i usualy get the up/down portion for the seat and trust me it makes installing a seat ALOT easier, then just using the sliding rails and you have a up/down motion with the seat now.
#6
dont tighten any of the bolts, just line everything up out side of the car, then go and put it inside the car. adjust the mounts to the car and tighten slowly. adjust the seat position last, as it puts strain on the brackets if u tighten it down first. it'll seem like a hassle but thats how i did it and it was an easy job.
Thread
Thread Starter
Forum
Replies
Last Post
FS[Northeast]: Driver side sparco r100 seat with bracket and slider
Squirrel2115
For Sale - Interior / Exterior / Sound / Styling
0
Sep 12, 2016 10:24 AM
RMRBlair
Evo 'For Sale' Exterior Styling
10
Dec 1, 2006 09:05 PM