cutting gauge cluster for aem gauge
#46
#54
EvoM Community Team Leader
iTrader: (60)
i haven't done it; a friend of mine has. you have to completely take the AEM gauge apart. you will only be using the internals. you will only cut away enough of the white housing to get everything to fit. i think he said he also had to use silicone to get it all to stay together and in place. the wires from the gauge exit the rear of the cluster. that's all i know about that.. i thought i remember him saying he had to do some rewiring. maybe he meant they were damaged during disassembly. once you start, it's pretty straight forward. just don't cut into anything electrical and you are good. neither of us cut the board or anything else important. be gentle with a dremmel and only trim as much as you need to.
#55
Newbie
iTrader: (1)
i grew a pair and did this the other day take 3-4 hour tops. cut the board were the top three lights go. but make sure you dont cut into the circuit lines above them, because those go to something else. i just used a dremel and made the three spots were the lights go bigger. just remember going down is ok, up is bad when cutting it.
#56
Evolved Member
iTrader: (8)
i grew a pair and did this the other day take 3-4 hour tops. cut the board were the top three lights go. but make sure you dont cut into the circuit lines above them, because those go to something else. i just used a dremel and made the three spots were the lights go bigger. just remember going down is ok, up is bad when cutting it.
Pictures?
Thread
Thread Starter
Forum
Replies
Last Post
FS[Northeast]: Evo IX ~170K mi $14,500 obo NJ
cs82685
For Sale - Cars For Sale
0
Jul 2, 2017 08:39 AM
DatEngnr_Bro
EvoM New Member / FAQs / EvoM Rules
4
Aug 22, 2016 02:28 PM
kyoo
For Sale - Interior / Exterior / Sound / Styling
6
Aug 15, 2016 08:10 AM