STM front crash bar
#1
Evolved Member
Thread Starter
STM front crash bar
Anybody run this piece? If so, what are your thoughts/feedback on it?
http://www.streettunedmotorsports.co..._crash_bar.htm
http://www.streettunedmotorsports.co..._crash_bar.htm
#4
I installed both yesterday. The front fit great but the back is to short and one of the bolts dont line up. i cant drill the hole out more because the hole was drilled as is to close to the edge.
#7
Evolving Member
iTrader: (4)
Join Date: Nov 2004
Location: SJ, CA.
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Installed a STM front bar. Light weight and sturdy. Quality piece.
But might need to remove two small pieces of styrofoam under the front bumper cover since the bar was rubbing them on mine. Not a big deal though.
.
But might need to remove two small pieces of styrofoam under the front bumper cover since the bar was rubbing them on mine. Not a big deal though.
.
Trending Topics
#10
Evolved Member
iTrader: (29)
was planning on running this, but there is a lot more talk about fitment than i had expected..
https://www.evolutionm.net/forums/ev...-your-evo.html
https://www.evolutionm.net/forums/ev...-your-evo.html
Last edited by kyoo; Jan 20, 2013 at 07:10 PM.
#11
Newbie
iTrader: (5)
Join Date: Sep 2011
Location: Parma, Ohio
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
i would be willing to bet the fitment issue is from chassis warpage/flex more than the product's fault.
I could be wrong in this case, but I went through the same thing on my GTI, an aftermarket crash bumper wouldn't fit because the frame rail was ever so slightly tweaked. had to flex the chassis a little to make it bolt up.
I could be wrong in this case, but I went through the same thing on my GTI, an aftermarket crash bumper wouldn't fit because the frame rail was ever so slightly tweaked. had to flex the chassis a little to make it bolt up.
#13
Evolved Member
Thread Starter
True, but I do suppose it's better than people running with no front crash beam at all. It's still not as safe as the OEM, but I guess you can get the best of both worlds with it. One system always affects another one. In this case, weight savings results in a less sturdy brace up front.
#14
Newbie
iTrader: (2)
why do people always go on about safety with crash bars?
They don't do a damn thing to make the car any safer in a collision.
The only thing it does is minimize damage in a low speed impact. It will have ZERO real impact on stability, strength, or resilience in a wreck.
The reason there are aftermarket versions instead of people just ditching it all together to save weight is insurance claims. In the event you got rid of em (like doing a JDM rear) and your insurance claims guy happens to care or know enough to check for it, you could potentially be in some **** with getting coverage.
Not likely though, they usually don't give a ****. lol
They don't do a damn thing to make the car any safer in a collision.
The only thing it does is minimize damage in a low speed impact. It will have ZERO real impact on stability, strength, or resilience in a wreck.
The reason there are aftermarket versions instead of people just ditching it all together to save weight is insurance claims. In the event you got rid of em (like doing a JDM rear) and your insurance claims guy happens to care or know enough to check for it, you could potentially be in some **** with getting coverage.
Not likely though, they usually don't give a ****. lol
#15
Evolved Member
iTrader: (29)
why do people always go on about safety with crash bars?
They don't do a damn thing to make the car any safer in a collision.
The only thing it does is minimize damage in a low speed impact. It will have ZERO real impact on stability, strength, or resilience in a wreck.
The reason there are aftermarket versions instead of people just ditching it all together to save weight is insurance claims. In the event you got rid of em (like doing a JDM rear) and your insurance claims guy happens to care or know enough to check for it, you could potentially be in some **** with getting coverage.
Not likely though, they usually don't give a ****. lol
They don't do a damn thing to make the car any safer in a collision.
The only thing it does is minimize damage in a low speed impact. It will have ZERO real impact on stability, strength, or resilience in a wreck.
The reason there are aftermarket versions instead of people just ditching it all together to save weight is insurance claims. In the event you got rid of em (like doing a JDM rear) and your insurance claims guy happens to care or know enough to check for it, you could potentially be in some **** with getting coverage.
Not likely though, they usually don't give a ****. lol