golgo13

iTrader: (134)

I use these:

10isace

iTrader: (12)

+1, however I usually use 4 ramps for all four wheels. I have to drive my rear wheels onto a 2x4 to get the ramp under the side skirts. The stops on my ramp is too high.

Nickzorz91

@ those of you who say you use a hockey puck.. do you mean you just place a hockey puck onto the normal floor jack or you actually take off the head of the floor jack so it's just a hockey puck?

Like this: http://i267.photobucket.com/albums/i...5208_0_ALB.jpg

Or would just setting a hockey puck on top be ok?

llDemonll

iTrader: (21)

that is a "bad" floor jack; the head of the jack isn't larger than the hockey puck. on a normal "good" floor jack, the puck will fully rest inside the recessed part of the jack

shaoyang951

I just bought an evo9, great info. Thanks.

RichieVegasIX

Yep yeah yes yay drive up on something and go under lift and call it a day!

EvoIXPilot

iTrader: (10)

Solution: When out and bought a $200 low profile and long floor jack from Harbor Freight that would clear the bumper and reach the front jackpoint. Well worth the money!!