theoszarz14

iTrader: (5)

While driving tonight out of no where I heard a loud noise, sounded like turbo spool but no power. After pulling over and looking for anything obvious I didn't see anything. Then noticed I couldn't hold any boost. Finally got to my hotel and tried looking again still didn't see anything. Check vac lines and all the couplers everything looks fine. Any ideas?

SW20Mike

iTrader: (6)

Boost leak test first and I'd say pull your intake off and check your turbo.

djdnav

iTrader: (7)

May have broken the spring In the bov. This happened to my forge rs valve.

theoszarz14

iTrader: (5)

Thanks for the input gonna check the bov as soon as I can

anwkid

iTrader: (1)

Any luck? Mine did something similar so I traded bov with my buddie and it fixed it. So now I have one on order.

Willens

I had that happen on my VR-4 once, I could use roughly 10% throttle, but anything to the point of building boost mimicked an F-A/18 building afterburner for a carrier launch while the car didn't really move. The silicone coupler to the throttle body from the y pipe had come just loose enough that it didn't blow off, but I could pull it straight off with a tug. Re-tightened, good to go.

evo_yoshi15

like the guy above said boost leak test,bov problem I had something similar but mine was fixed by a vacuum line not connected good luck dude hope u fix it