Squash Performance Double Pumper -- Freeking Amazing
#61
Just wanted to post this up incase anyone else needs it.
Replacement plug
Delphi Apex series - 54200608
http://www.mouser.com/ProductDetail/...T9cvVE6KucpS9P
10-12awg terminals - 54001003
http://www.mouser.com/Search/Product...GE0jsa4Q%3d%3d
I am redoing the entire evo harness and wanted to remove all the ****ty splices so now I am running tefzel wire and all new plugs all over the place.
Here is a thread with a lot of sealed connectors.
http://aemelectronics.com/?q=forum/w...r-relays-guide
Replacement plug
Delphi Apex series - 54200608
http://www.mouser.com/ProductDetail/...T9cvVE6KucpS9P
10-12awg terminals - 54001003
http://www.mouser.com/Search/Product...GE0jsa4Q%3d%3d
I am redoing the entire evo harness and wanted to remove all the ****ty splices so now I am running tefzel wire and all new plugs all over the place.
Here is a thread with a lot of sealed connectors.
http://aemelectronics.com/?q=forum/w...r-relays-guide
#62
Evolved Member
iTrader: (4)
Walbro offers two of their "fat-bottom" pumps - one is not rated for E85 use (F90000262) but the other one is (F90000267), and we have zillions of them out there running corn gas all day long. These pumps deal with hot fuel better than all the others, and they are turbine pumps so they are quiet, unlike the old Walbro 255.
#64
Evolved Member
iTrader: (6)
#65
Evolved Member
iTrader: (38)
That doesn't seem right. They have fixed the issues with the hanger just recently. https://www.evolutionm.net/forums/ve...nt-issues.html
#69
Evolving Member
iTrader: (1)
Same here...fuel pressure looks great but that's 93 octane. My tuner is suggesting I will have fuel issues once I switch to ethanol. This might very well be true so I figure I would just see what kind of power other people are seeing with this setup. I'm hoping to see 825-850 peak hp out of my 2.2 T/S 6466 setup.
#70
Do you have a fuel pressure log? My logs for fuel pressure are perfect no dips, no spikes, just spot on fuel pressure. When I was running 42psi about 780whp no dyno or vdr to back the numbers, again I did not have any fuel pressure issues.
I am running a base fuel pressure of 60psi so at 42psi I was at a total of 102psi fuel pressure. I would see 98-105psi fuel pressure.
I am running -6 fuel line for supply and return, skunk 2 composite fuel rail and aeromotive fpr.
With out data to back up the claims they are full of ****.
I am running a base fuel pressure of 60psi so at 42psi I was at a total of 102psi fuel pressure. I would see 98-105psi fuel pressure.
I am running -6 fuel line for supply and return, skunk 2 composite fuel rail and aeromotive fpr.
With out data to back up the claims they are full of ****.
Thread
Thread Starter
Forum
Replies
Last Post
240Z TwinTurbo
Vendor Service / Parts / Tuning Review
37
Dec 9, 2018 08:16 PM
DrivenFab
EvoX 'For Sale' External Engine / Power
28
Nov 21, 2016 11:37 AM