Dirty_Evo

Putting my motor back together and can't for the life of me remember where these plugs go. Any help is appreciated.

superbovine

iTrader: (23)

First pictures suck, but I would guess EGR and evap connectors in the passenger side rear area?

luvboost

iTrader: (15)

What are you talking about Those pictures are amazing. I wanna have sex with them. That guy should be a hand model

cwyteboi

LMAOTIC. But yeah! On the back side of engine, one of them goes to a small canister with vac lines.

Dirty_Evo

I managed to rule out the 2 black ones. They grey one is still a mystery to me though.

superbovine

iTrader: (23)

What color are the wire(s)? The connector is the same as the one for the knock sensor and would be right in the same area in the passenger rear of the engine bay. That would make sense if the other two were Evap and FPS.

02-Lancer-Es

iTrader: (21)

Evo 9 or 8 ? Silver is knock sensor , black and brown is fuel pressure regulator solenoid(Not needed ) and black connector is Egr (Not needed )

Dirty_Evo

Thanks for the input guys. I figured out the last one shortly after my last post. It was to the knock sensor in the back of the block. The plug fell down and I had to dig it out.