Buschur dp and stm testpipe, exhaust leak
#1
Buschur dp and stm testpipe, exhaust leak
Hey fellas,
I just switched over to a buschur dp and it doesnt align too well with my stm test pipe. Theres a bgger gap at the upper part of the pipe. I tightened the bolts very hard bt it still leaks. I even used 2 gaskets, stiill leaks. What else can i do? Its driving me crazy.By the way, happy holidays.
I just switched over to a buschur dp and it doesnt align too well with my stm test pipe. Theres a bgger gap at the upper part of the pipe. I tightened the bolts very hard bt it still leaks. I even used 2 gaskets, stiill leaks. What else can i do? Its driving me crazy.By the way, happy holidays.
#3
I dont have any pic now, but it leaks at the upper part of the pipe where the bolt is at. When i put my hands there i could feel the leak. I cannot believe 2 gaskets wouldnt do it. Is there another way? Maybe someone with a buschur dp and stm test pipe can chime in.
#4
Need some help guys.
I switched over from the ebay one to the buschur dp. I didnt have exhaust leak from the ebay one other than it was sitting next to the transfer case.
I first bolted the dp to the o2 housing then to the test pipe. I thought the leak would stop by using 2 gaskets but it didnt help.
I switched over from the ebay one to the buschur dp. I didnt have exhaust leak from the ebay one other than it was sitting next to the transfer case.
I first bolted the dp to the o2 housing then to the test pipe. I thought the leak would stop by using 2 gaskets but it didnt help.
Thread
Thread Starter
Forum
Replies
Last Post
FS[Northeast]: Ams T3 manifold, Precision Wategate, dump tube
manthny18
For Sale/WTB - Engine / Drivetrain / Power
8
Dec 10, 2015 09:11 PM
PatricksEvilEvo
Evo Engine / Turbo / Drivetrain
20
Oct 31, 2011 10:53 AM