Aby@MIL.SPEC

iTrader: (161)

what boost level does this happen at?

is the problem still there if you turn the boost down by 4 psi or so?

did this problem just creep up or did it happen after parts were changed?

rodent

iTrader: (35)

I didn't realize you still had SES lights. You need to find out whats triggering these first. Did you try to swap the TPS?

black_beauty

iTrader: (19)

@Aby seemed to be outta no where, pulled hard, flashed a new rom car was lean and acting stupid. Boost level ill have to check the log, but its anywhere between 3800-4200 during spool. @RODENT if my TPS was bad would it still read correctly in evoscan? I checked my cam timing and its fine. I did discover when the car is idling if I wiggle my MAF wires the car goes lean to 10-10.6 and sounds like its about to die? Tuner has told me mafs are junk, but its gonna be more money to tune for speed density, so im trying to figure the problem out before just going SD.

black_beauty

iTrader: (19)

Think my problem is solved. Seems it was a bad new plug or a bad connection at the COP...

Bhsj13

lets hope that everything is good now. let us know!