evo9powerr

Im looking for a place that sell
This center poece to fit my 3 gauges .. It looks
Like a custom piece i dunno . Is there any place that sell
This piece like this??? I dont want just to buy he adapter place to put on my center piece. i will prefer to buy this whole piece ... Thanks guys

caLi4G63

iTrader: (40)

I could be wrong, and someone correct me if I am, but I believe Gruppe-S use to make those, I don't think they make them anymore.

Faisalm

Gruppe-S used to make them, then they were discontinued.

The way I see it, you have 2 options:

1- Speak to Cyanide, a reputable EvoM member that has done these before. If you go to his website you'll find his e-mail. Website linked.

2- Buy a Colt Speed Triple Gauge Panel, and then speak to Cyanide to purchase an HVAC relocation kit.

Obviously the second option is a PITA, so your best choice would be to speak to Cyanide and ask if he's willing to make you one.

jason42003

iTrader: (18)

nope you're right, although they were entertaining the idea of making them again recently. I guess somewhere along the lines the mold that the company they had make them was using got lost. But supposedly there is an ebay company that is selling a piece similar to that although I haven't checked it out since I have a gruppe-s one to begin with.

Here's the link to the thread on the ebay one.
https://www.evolutionm.net/forums/ev...-gruppe-s.html

2slow4g63

iTrader: (1)

lancershop.com has it

jason42003

iTrader: (18)

I would call and confirm that they have it in stock before ordering, I have had issues with lancershop still advertising parts as available that have been discontinued or have an unknown wait time before.

Faisalm

I was just about to edit my post and add this.

Another one is this: http://www.ortizcustompods.com/mitsubishi.html

Not really my kind of thing... But, to each his own...

Faisalm

Yeah, lancershop shouldn't have them... They've been discontinued for a very very long time. I doubt they'll have any of these lying around.

evo9powerr

i need this so bad .. This is the only place i will like my gauges mounted

michaelrc51

iTrader: (37)

Yeah, they are going for big money since they haven't been produced in a few yeas. The 52mm ones are worse to find than a 60mm one but either way it will be hard to find.

Blue91lx

iTrader: (44)

I would recommend a 42DD triple gauge pod. That and a radio relocation and you're good to go. I think it looks far better than the Gruppe, as you get to use your factory HVAC panel.

patryk

There is a Gruppe-S one on ebay
http://www.ebay.com/itm/Lancer-EVO-HVAC-Gauge-Panel-Gruppe-S-52mm-SUPER-RARE-HARD-TO-FIND-EVOLUTION-/201095342998?pt=LH_DefaultDomain_0&hash=item2ed2376b96
but it's $500...

evo9powerr

Which one is the 42dd can you send me a link

jason42003

iTrader: (18)

Damn if he gets that much for it makes me consider selling mine, that's at least valves and studs to finish up the parts list for my head rebuild. I forgot to also add that there is a company that makes a carbon fiber version that looks similar to the gruppe-s one with angles and all. But you have to cut out the holes for the gauges yourself so the up-side of that is that it will fit either 52mm or 60mm gauges.
http://roadracemotorsports.com/store...roducts_id=726

AreSTG

iTrader: (4)

lol I was thinking the same thing. Hell, All that info is datalogged and I can just set limits in AEM to blink a LED or something if I'm worried about not being able to monitor. Heck, not like I look at them WHILE racing, just before and after...