need help on injectors selection
#1
Evolving Member
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Hinesville
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
need help on injectors selection
How you doing guys I know that this has been a battle before but not a lot info about it. I am looking for some injectors for my setup and I just can plug and play not to much headache. I am looking around 1000cc to 1200cc. I heard that RC 1000 and the dynamic 1000 cc are plug and play. I am not looking to make enormous power between 350 to 400. This my setup right know.
HKS exhaust and TBE
megan o2 housing
ETS intake
ETS 4" intercooler and upper and lower piping
walbro 255 lhp
competition stage 3 clutch
grimmspeed 3 port
Thanks for the suggestions.
HKS exhaust and TBE
megan o2 housing
ETS intake
ETS 4" intercooler and upper and lower piping
walbro 255 lhp
competition stage 3 clutch
grimmspeed 3 port
Thanks for the suggestions.
#6
EvoM Community Team Leader
No new injectors will be plug and play. You have to get a tune when you change injectors.
Trending Topics
#9
Newbie
iTrader: (1)
I heard RC is a good brand used some 750cc RC in my car for awhile and they did good. A lot of tuners like the injector dynamics they flow good and get good drivability out of them. I personally have BOSCH 1150cc injectors and am really happy with them. They have good drivability and tuned just fine. Read a little bit online that the BOSCH and the ID's are really similar. The ID's use a BOSCH style injector but other than that I'm not sure how identical they are. But BOSCH is good bang for the buck IMO.
#11
Evolved Member
iTrader: (13)
Join Date: Sep 2011
Location: JacksonvilleNorth Carolina/Central Florida
Posts: 1,288
Likes: 0
Received 1 Like
on
1 Post
get FICs and you will need a tune, no "plug and play" injectors but yes they do "plug in" if that is what you're talking about, you won't have to slice up your wiring harness or anything crazy like that
#12
EvoM Community Team Leader
yah more like "plug and tune"
#14
Evolving Member
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Hinesville
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
sorry for the confusion. thank you gearjammin for the explanation I want injectors that I can plug in to the factory connector and still do there job. I am tracking that I need a tune. thanks for there help and patience.