Apexi turbo timer questions
#1
Evolving Member
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Hinesville
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Apexi turbo timer questions
How you doing guys. I know I made a mistake to buy a turbo timer for my evo 9 before I deploy because the good things that I heard about. But I don't really see the point. but because I bought it I am going to install it. I bouth the HKS harness from lancershop but I am confuse where the cables black,gray and white goes. any help I appreciate. thanks
#6
Evolved Member
iTrader: (9)
It's been awhile since I installed mine, but one wire goes to your o2, "IF" you want to use that feature, one goes to your e-brake so it automatically shuts off the engine when you release it. the other one is a ground or a 12v source idrc right now. Not sure which wires are what so you need to look at your instructions.
Last edited by 3K; Jun 29, 2014 at 01:45 PM.
#7
Evolving Member
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Hinesville
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
ok tracking the black is ground it goes to the ECU in the left side but there is so many wires. The white is the 02 sensor and it goes in the plug in the right side but and the gray is in the brake. But this is the thing I look the picture and the ECU of the picture wish is a evo 8 is diferent from the 9 and I don't know in what wires goes and the funny part the instructions it doesn't explain.
Trending Topics
#8
Evolved Member
iTrader: (9)
Yeah, I hear you. I got my ecu pin out diagram off of road race engineering's website. I 'm not sure if they have one for the 9, but you could check out their site. or if you have access to All-data. they should have it. Or try searching google for a evo 9 ecu pin out diagram. good luck.
#9
Evolved Member
iTrader: (10)
Join Date: Mar 2013
Location: Chicago
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
http://www.evoscan.com/vehicle-manuals
Go to where it says evo IX ecu pinout pdf and download it and then you will know what wire is for what. Easy enough and good luck.
Go to where it says evo IX ecu pinout pdf and download it and then you will know what wire is for what. Easy enough and good luck.
#10
Evolving Member
the black doesnt need to go the ecu necessarily it can be grounded to the chassis, the other 2 wires yo got it right its really not that hard to do it only took me 20-30min
#12
Evolving Member
Thread Starter
iTrader: (3)
Join Date: Jan 2013
Location: Hinesville
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
how you doing guys so today I decided to install my turbo timer apexi. Take all the steering wheels covers the glove box fo ECU and the E brake so I can work with the place clean. I Buy the HKS plug and play harness so is easy to do. I start looking for the male harness find it. Next I start looking for female part and I cand find it. the cable goes up like going to the mileage cluster. There is another some cables has tape on it so my guess a retard cut the female plug and right know I have all my dash fall apart. any help