1SlowRS

Hey guys I'm kinda new here and I was looking for a intake for my car I know Perrin is best but no company's online has them stock so guess they stopped making them? What is the next best intake compared to the Perrin? Thanks

Ps:also was looking for somthing under 300

ak47po

iTrader: (3)

http://www.streettunedmotorsports.co...ipes_hoses.htm

1SlowRS

What filter?

Ryuartz

iTrader: (15)

I heard Apexi is nice air intake. It comes with heatshield and dry filter is big plus.

NJ9MR

iTrader: (56)

HKS is a GOOD one also.

1SlowRS

Like hks drop in filter? Or the intake kit? I see there are 2 different intake kits as well one is like 200 and the other is like 360ish

nemsin

iTrader: (19)

I like the Apexi induction box http://www.apexi-usa.com/store/induc...olution-9.html

You can pair it with their intake kit http://www.apexi-usa.com/store/power...cer-evo-9.html

or use a wide variety of other intake filters.

I bet you could get the pair for $300 through MAP http://www.maperformance.com/

ronaldo9

iTrader: (2)

You can also get a samco intake hose which is identical to the perrin and still purchase a perrin filter. Another option is to use the stock intake hose and slap on any filter you desire such as a perrin filter which is what I'm doing currently.

1SlowRS

But in the end does it still make the same power gains as Perrin claimed with just changing the filter like that?

NJ9MR

iTrader: (56)

I started off with the drop in, then a few months later, I went with the full intake kit.

nemsin

iTrader: (19)

If you car is otherwise stock, maybe just consider a better flowing drop in filter http://store.worksmotorsports.com/WO..._p/110.100.htm

essej

iTrader: (10)

Just get the shortest possible pipe and stick a filter on it. That way you could run speed density and remove the maf which will yield the most power gains. That would cost around $300; it's a great mod (speed density) for the future if you were looking to get a larger turbo.

AJCaron12

I've had the Perrin intake setup on 2 of my Evo's. I'm going to change over to the ETS kit next. I like how the ETS one looks, and I don't like how close the Perrin sits next to my radiator fan.

e_kobz

iTrader: (36)

Does your Perrin Intake have the bracket holding it in place?!

CaptainSquirts

iTrader: (3)

I contacted Perrin and they sent me a filter. They no longer show on there website but if you call them they will still sell it to you.