wazmunstr

iTrader: (11)

Quick back story: I was in an accident a few months ago, and I chose to fix the car myself. The body shop straightened the front end, but cut the lines for the ac condenser. It needed to be replaced anyways but I was hoping they wouldn't have cut the lines.

Anyways the condenser was tossed out so I'm not sure if the upper and lower hoses that feed into it need o-rings. I noticed when I replaced the upper hose, the half that you recharge from, the two halves that make up one did not have an o-ring so I wasn't sure.

Any help is greatly appreciated. Thanks!

barneyb

Two o-rings are required for the two lines connecting to the condenser. Two o-rings are required to connect the dryer to the condenser.