Ssj4jackson

A couple weeks ago a found a module for the Evo X that simulates the weight sensors specific signal and allows you to change seats. so i planned to do a write up on it.
I figured the install would be much more complicated than this but here it goes

Under the passenger seat:


the plug on the left is the one we need to splice into.

on our Module we have 3 wires. Black, Red, Yellow

splice the black and red to the black and red on the plug.

splice the other 4 wires Blue, Green, Yellow, White all into the single yellow wire.

unplug all the weight sensors, or cut that portion of the harness off if you never plan to put it back together.

going on 100 miles without any issues, or weight sensors in the car.

here's the link where i bought it. I have not seen one anywhere else online either.
Modomotive.com

superbovine

iTrader: (23)

Probably get more action in the Evo X section