Sizing fuel injectors
#1
Newbie
Thread Starter
Join Date: Mar 2015
Location: So cal 19o4
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Sizing fuel injectors
My current setup is
fp green
fp4r 280 cams
indivia 3" DP
full exhaust, full upper and lower intercooler piping
Walbro 255
JM fab external dump
JM fab exhaust manifold
I want to run e85. Are the fic 1650 blue max low z too big?
fp green
fp4r 280 cams
indivia 3" DP
full exhaust, full upper and lower intercooler piping
Walbro 255
JM fab external dump
JM fab exhaust manifold
I want to run e85. Are the fic 1650 blue max low z too big?
#3
Newbie
Thread Starter
Join Date: Mar 2015
Location: So cal 19o4
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
#4
EvoM Staff Alumni
iTrader: (3)
That injector size is likely right on the money based on where youre headed
I run 1000cc inj on E85 but Im stock turbo & cams. Duty cycled at 85%
Heres a calculator & thread for you:
http://fuelinjectorclinic.com/flow-calculator
https://www.evolutionm.net/forums/ge...injectors.html
I run 1000cc inj on E85 but Im stock turbo & cams. Duty cycled at 85%
Heres a calculator & thread for you:
http://fuelinjectorclinic.com/flow-calculator
https://www.evolutionm.net/forums/ge...injectors.html
#5
EvoM Guru
iTrader: (1)
You're going to need a walbro 450 pump. And I would get FIC Hi-Z 1650 injectors. And you'll have plenty of fuel.
Trending Topics
#8
Evolving Member
iTrader: (22)
When you get a second, could you shoot me a PM with your impressions of those FP4R cams during idle/spool/topend/daily driving? I have a set I haven't installed yet and I was curious. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Inn-Tune
Evo Engine / Turbo / Drivetrain
42
Mar 11, 2006 01:32 PM