eddy5201314

I'm noticing when I shift at 3500rpm or higher, when I disengage clutch the rpm won't drop down as quickly as I disengage clutch, (it's like if I shift at 4000rpm and then I press clutch all the way in and begin to shift and the rpm will just stay at 4000rpm for one or two second) it feels like I'm accelerating and shifting at the same time. If I drive normal shift at 3000rpm it drop down immediately when I disengage the clutch. anyone knows if this is normal? I only have basic bolts on mods on the car.

josh_evo9

iTrader: (1)

Evo 8 or 9? My 9 was doing this after I had my car tuned. There's a thread on here about rev hang and how to eliminate it through tuning.

https://www.evolutionm.net/forums/ecuflash/656179-how-eliminate-rev-hang-05-evo-8-9s.html

eddy5201314

it's a evo 9, I just had a dyno reflash done few days ago and it's still doing that.

josh_evo9

iTrader: (1)

Have your tuner do specifically what is suggested in the thread I linked. My car didn't start doing it until I got tuned. So I had it retuned and had my tuner follow that thread. Problem solved.

eddy5201314

im not too sure, but I know it only happens when I wot the car if driving normally rpm will drop right down when I press clutch in.