Beatrush & Ralli Art CF Lip
#1
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
Beatrush & Ralli Art CF Lip
I am ready to set this damn car on Fire
I must have been busy 3-4 hours trying to get this to work, anybody have the raliiart CF lip installed with a beatrush under panel without any problems?
The holes just don't seem to line up very well to install the plastic screws that comes with the original plastic undertray.
I had a look at the Beatrush panel against the stock front spoiler and all lines up OK!
so clearly it is the Ralli Art spoiler causing the problems......
And Yes it is the genuine Ralli Art item not some knock off.;
I am pretty livered.....spent all this money and this crap don't fit nicely
I must have been busy 3-4 hours trying to get this to work, anybody have the raliiart CF lip installed with a beatrush under panel without any problems?
The holes just don't seem to line up very well to install the plastic screws that comes with the original plastic undertray.
I had a look at the Beatrush panel against the stock front spoiler and all lines up OK!
so clearly it is the Ralli Art spoiler causing the problems......
And Yes it is the genuine Ralli Art item not some knock off.;
I am pretty livered.....spent all this money and this crap don't fit nicely
#2
Ok man take it easy before you do something bad to your car. I have the exact same setup and its true most of the holes dont line up which sucks. You should be able to get a few across the front and back, as well as the two side brackets that bolt to the fender liners, and for the ones that dont quite line up just throw a few zip ties on there and you will be good to go.
#3
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply buddy!!
I love my car to much to harm it...
you know i thought i am gonna spend the extra money and get the real deal and make sure that fitment is good, guess i came up short.
What i am actually planning on doing is getting some bolts and speed clips to replace the plastic crap and i wont need as much space for the plastic clips, so even if it is a bit off it will fit 100% and screw on tight.
suppose the ralliart spoiler is hand made and can't be 100% perfect.
I love my car to much to harm it...
you know i thought i am gonna spend the extra money and get the real deal and make sure that fitment is good, guess i came up short.
What i am actually planning on doing is getting some bolts and speed clips to replace the plastic crap and i wont need as much space for the plastic clips, so even if it is a bit off it will fit 100% and screw on tight.
suppose the ralliart spoiler is hand made and can't be 100% perfect.
Thread
Thread Starter
Forum
Replies
Last Post
Faust
Evo How To Requests / Questions / Tips
76
Nov 6, 2018 06:47 PM
sillyme
Evo General
7
May 17, 2011 07:38 PM
peter*g
Vendor Service / Parts / Tuning Review
29
Nov 21, 2007 08:44 AM