aaevol9

iTrader: (6)

Hey guys im swapping the standard lip on my evo 9 for the SE version. I have been told that there is two side brackets I would need. My question is, is there any other way to install the lip without the brackets or are the brackets a must have to get the lip on there???

aaevol9

iTrader: (6)

bump

benniboi08

iTrader: (35)

i installed my se lip fine. i did it a couple weeks ago and i had no problem without any brackets. there is about 1-1.5 inch gap from the lip to the underpanel. so i just took some zip ties to make sure it is not dragging hope that helps

xmaciek82x

iTrader: (14)

If you want to run an under tray, you will need 3 different pieces to get it connected. If you are not using an under tray, then you just bolt it up.

aaevol9

iTrader: (6)

That was exactly the information I was looking for, thanks alot guys!

juanpdu

someone has a evo 9 oem mint lip fs???????????????? thanks

ChicagoEvo9

iTrader: (3)

Anybody have a video or pics for this install?

NJ9MR

iTrader: (56)

If you are NOT using an under panel, you'll be fine without the 3 black ABS panels. If you ARE running an under panel, wether it's OEM, or Aftermarket, it's a smart idea to buy the 3 'SE' Lip panels because with that gap, you are creating unwanted turbulence. You want your undercarriage to be as 'free-flow' and aerodynamic as possible. Plus, now your under panel is just hanging lower (with, or without zip-ties), etc. and there's a good chance when going over a speed bump, or a driveway curb you're going to hit the under panel.

I also went from a standard IX lip to an 'SE' Lip.

manolo2011

iTrader: (4)

^^^^^^^^^^^^^ what he said!!!

november

iTrader: (5)

For anyone else looking for the Airdam reinforcement pieces.

Their are 2 identically mirrored pieces on each side, those PN's are:
(I don't know which is left/right, sorry)
6512A151
6512A152

Then there is one piece on the passenger side that "completes" the lip

6400B288