License plate holder with Demonwerkz
#1
License plate holder with Demonwerkz
Anybody have any good pics showing details of how the license plate holder and lights mounts back on the Demonwerkz crash beam for the JDM bumper?
Yes I have searched, tons of stuff on modding the OEM US spec crash beam, but not a lot on the Demonwerkz unit.
Yes I have searched, tons of stuff on modding the OEM US spec crash beam, but not a lot on the Demonwerkz unit.
#2
Newbie
iTrader: (1)
Join Date: Sep 2008
Location: Anchorage Alaska
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunatly I didn't take any pictures of my install, but I can tell you that the Demonworks Crash Beam already has tapped holes in it to bolt on your license plate.
The stock metal bumper retainer (metal strip attached to your USDM bumper by rivits) can be split into three pieces (i.e. Left, Middle, Right). The middle piece is the one that has the lights and stock license plate holder. If you want to keep your lights, you'll have to cut/bend the stock license plate holder tabs because it will stick out and look fugly imo.
The stock metal bumper retainer (metal strip attached to your USDM bumper by rivits) can be split into three pieces (i.e. Left, Middle, Right). The middle piece is the one that has the lights and stock license plate holder. If you want to keep your lights, you'll have to cut/bend the stock license plate holder tabs because it will stick out and look fugly imo.
#4
Newbie
iTrader: (1)
Join Date: Sep 2008
Location: Anchorage Alaska
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
For mine i just put the license plate out over the bumper and bolted it up to the demon works beam just fine. I can get you a picture of what mine looks like tomorrow, i dont have my car with me right now.
Trending Topics
#11
By the way ... is there a good knock off out there that anyone would recommend or the best bet is to get the OEM JDM rear bumper?
I'm also looking for a EVO complete front bumper as well. I have been contemplating whether or not I should go with an aftermarket front bumper like the C-west ... any thoughts?
I'm also looking for a EVO complete front bumper as well. I have been contemplating whether or not I should go with an aftermarket front bumper like the C-west ... any thoughts?