Hello all. I did a quick search and found how to get TDC with belts on. I need to know how to achieve TDC with no belts. any pictures would be great. I read that the best way to reset TDC is cams, crank, balancer then oil. Where would i find TDC marks from everything?


Edit :
I just found this picture. https://www.evolutionm.net/forums/at...-how-pg-6a.pdf
if i align the cams straight up first. then i align the crank or in this case the larger Balance gear white mark to the arrow on the motor, i then align the balancer to white mark to white mark and end it with the oil pump to white to white. would this get me to TDC?

long story but lets just say my buddy sucks and he decide to get back at me for junk punching him so he decide to mess with the motor after i had all the belts off.

Thanks

 

The big pulley in the center of the photo is your crank. All you have to do for TDC is to line up the center punch mark (white dot) with the timing mark.

 

line up the notches