sorry for the noob question but i'm starting on my modding and looking for some help. i know with all being stock i can bring it to a shop and have a flange welded on and it will be good but didn't really want to go that route.

i'm in the market also for intake and intercooler piping right now.. any recomendations for a set that are good quality and are compatible with tial qr?

any help would be appreciated (and yes im recirculating not VTA)

 

There are many options to choose from. The things to focus on is does the piping have the option choosing your bov flange, where they will weld on your selected flange (which most do), if it's compatiable with the stock and aftermarket turbo kits if you were to upgrade (which most are), and if you want to do a short route upper intercooler piping (which requires a mini battery or relocating it to trunk), or the standard route (which works with the full size battery). As far as intake, you can replace the whole thing with a pipe, adapter plate (for the MAF sensor), and filter kit, through a adapter plate (for MAF sensor) and filter, or drop in filter in stock airbox. This should give you a general idea as you look around.

 

Check this link out for some intake options that this guy is selling right now on the forum https://www.evolutionm.net/forums/sa...e-springs.html. This should give you somewhere to start

 

great.. thanks for the advice

 

I would get ets v2 with already welded flange on

 

forgot to update this, just went with buschur icp and had tial flange added