AEM AEM AEM AEM!!! Gauges, Wideband, EMS & more! MUCHO UEGO!
#51
Block stock
7 bolt DSM 2.0l - Manley H beam rods and Mahle pistons with oil pump and BSEK already installed!
$2,495.00 SHIPPED TO THE LOWER 48!
6 bolt DSM 2.0l - Manley H beam rods and Manley pistons with oil pump and BSEK already installed!
$2,495.00 SHIPPED TO THE LOWER 48!
EVO X - 4B11 - Manley H beam rods and Manley 2618 forged pistons ready for your 600 WHP set up!
$4,495.00 SHIPPED TO THE LOWER 48 - THIS BLOCK IS BRAND NEW - STD BORE!
Mention this post and the forum you saw it in and get $100.00's in free product to go with your purchase!
Call Joe, Mike Adkins, or Mike Huml today at 321-304-4907 or email sales@slowboyracing.com for your best prices anywhere! We will beat or match any legitimate sales quote from any competitor!
$2,495.00 SHIPPED TO THE LOWER 48!
6 bolt DSM 2.0l - Manley H beam rods and Manley pistons with oil pump and BSEK already installed!
$2,495.00 SHIPPED TO THE LOWER 48!
EVO X - 4B11 - Manley H beam rods and Manley 2618 forged pistons ready for your 600 WHP set up!
$4,495.00 SHIPPED TO THE LOWER 48 - THIS BLOCK IS BRAND NEW - STD BORE!
Mention this post and the forum you saw it in and get $100.00's in free product to go with your purchase!
Call Joe, Mike Adkins, or Mike Huml today at 321-304-4907 or email sales@slowboyracing.com for your best prices anywhere! We will beat or match any legitimate sales quote from any competitor!
#52
Hks exhust sale
Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path.
For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies.
IN STOCK - $579.00 SHIPPED!
Have it installed and before and after dyno runs for only $150.00 more!
Call Joe, Mike Adkins, or Mike Huml today at 321-304-4907 or email sales@slowboyracing.com for your best prices anywhere! We will beat or match any legitimate sales quote from any competitor!
For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies.
IN STOCK - $579.00 SHIPPED!
Have it installed and before and after dyno runs for only $150.00 more!
Call Joe, Mike Adkins, or Mike Huml today at 321-304-4907 or email sales@slowboyracing.com for your best prices anywhere! We will beat or match any legitimate sales quote from any competitor!
Last edited by SBR INC; Nov 10, 2010 at 08:28 AM.
#53
Aem day
AEM Black cam gears for your EVO VII or VIII - ONLY $209.00 a set SHIPPED!
AEM HI FLOW Fuel rail for only $119.00 SHIPPED!
AEM FPR and all the parts needed to install your aftermarket regulator kit for an additional $199.00!
Want yout FPR installed professionally? Yes, we can do that as well - $150.00 will install your fuel rail, FPR, and all the braided lines to make your fuel system complete!
Call Joe, Mike Adkins, or Mike Huml today at 321-304-4907 or email sales@slowboyracing.com for your best prices anywhere! We will beat or match any legitimate sales quote from any competitor!
#56
Innovate!
Innovate Motorsports releases the fastest wideband air/fuel ratio gauge available!
Innovate Motorsports has announced the release of the new “Digital MTX” wideband air/fuel ratio gauge. The new gauge utilizes Innovate’s patented 100% digital wideband technology that is 180 milliseconds faster and more accurate than the analog technology commonly used by other products. To put this into perspective, at 8000rpm the Digital MTX gauge will see a change in air/fuel ratio 24 revolutions of the crankshaft sooner than all other gauges on the market! Several new features have also been added to the gauge design including an integrated wideband controller for simplified installation. By integrating the wideband controller within the gauge, the 02 sensor can now be plugged directly into gauge without the use of an external controller. In addition, the included sensor is compatible with all popular fuel types and can be quickly and easily calibrated to compensate for sensor wear, changes in atmosphere or other variables. A newly designed gauge body features a weatherproof o-ring seal that protects the gauge from water, dirt, or other elements commonly found around racing vehicles without changing the appearance. To allow for a customized look, each kit includes 2 gauge bezels (black/silver) and 2 faceplates (black/white) that are completely interchangeable. The complete Digital MTX gauge kit has an MSRP of only $199.99!
KEY FEATURES:
• The only 100% digital wideband air/fuel ratio technology available (Patented)
• Water Resistant 52mm (2 1/16”) round dash-mountable casing is perfect for automotive, powersports, marine, and demanding racing applications
• Built-in “DirectDigital™” Wideband Controller reduces wiring and simplifies installation
• Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included
• Wideband O2 sensor (included) is compatible with all fuel types including leaded and unleaded gasoline, diesel, methanol and E85.
• Instant and dead-on accurate sensor calibration. Easy user calibration that compensates for sensor wear and for barometric correction.
• The Innovate system utilizes sensor feedback to determine when the sensor is damaged. The gauge will display an error as opposed to erroneous data displayed by other systems.
• (2) 0-5v fully programmable linear analog outputs for use with engine management systems “closed-loop” and external dataloggers
• Large digital readout and programmable “Digital Needle” provides the functionality of a needle style gauge with the pinpoint accuracy of a digital display
• Datalog on your PC using the included LogWorks software
• Serial IN and OUT ports allows for easy connection with Innovate’s “Modular Tuning System” or other compatible devices
The complete Digital MTX gauge kit has an MSRP of only $199.99!
Pre-orders will receive free shipping! Call or email us for a complete price guide on the entire Innovate line up!
Call Joe, Mike Adkins, or Mike Huml today at 321-304-4907 or email sales@slowboyracing.com for your best prices anywhere! We will beat or match any legitimate sales quote from any competitor!