RavSpec

iTrader: (80)

Cosworth Camshaft Set For EVO IX - MIVEC - $640 Shipped
272 Degree, 11.0 mm lift - EVO Mivex

Cosworth Camshaft Set For EVO VIII M1 or M2 - $599 Shipped
Ground From New Chill cast billets



Cosworth Rod Bearing Set For 4G63 - $50 Shipped
Ground From New Chill cast billets



Cosworth Main Bearing Set For 4G63 - $70 Shipped
Ground From New Chill cast billets



Cosworth Piston Set (85mm or 86mm Bore) - $995 Shipped
Ground From New Chill cast billets



Cosworth 4G63 Big Valve Clyinder Head - PM For Price



Cosworth 4G63 High Performance Short Block (2.0 L / 2.2 L) - PM For Price
New Block, Cosworth Pistons, Rods, Bearings, Mitsu Crankshaft

RavSpec

iTrader: (80)

Mahle 85.5 mm Bore Piston and Ring Set - $499 Shipped
Mahle 86.0 mm Bore Piston and Ring Set - $499 Shipped



Wiseco 85.0 mm Bore Piston and Rin Set - $459 Shipped
Wiseco 85.5 mm Bore Piston and Rin Set - $459 Shipped
Wiseco 86.0 mm Bore Piston and Rin Set - $459 Shipped
Stroker Piston Available At Same Price ** PM For Order **



ARP Head Studs Kit For 4G63 - $125.99 Shipped
Cosworth Head Studs Kit for 4G63 - $189.99 Shipped

TOMEI EVO 9 MIVEC CAMS - $PM FOR PRICING



http://www.tomei-p.co.jp/top/e-top.html


Here are some parts that we have in stock and ready to ship !




TOMEI PON Camshaft with Cam Gears Package - $950 Shipped Per Set (2 x cams, 2 x gears)
Good For Moderate Modified Application

TOMEI PRO Cam Shaft (Solid or Lash) With Cam Gears Package - $950 Shipped Per Set (2 x cams, 2 x gears)
Good For Heavy Modified Application
Need Additional Accessoreis like Solid Pivot or Tomei Spring - Good For 500+ WHP
Available in Lash Or Solid Stype, 260 (10.7 mm Lift), 270 (11.5 mm lift) or 280 (11.5mm lift)

TOMEI EVO 9 MIVEC CAMS AVAILABLE TO SHIP - IN STOCK NOW !




TOMEI 4G63 Spring - $299 shipped
Approximately 12mm lift. Needed for high lift cams !

TOMEI 4G63 EVO 1~3 and EVO 4+ Cam Gears - $319 Shipped Per Set of 2


Super lightweight duralumin Lightweight duralumin was overly adopted as the material of both pulley part of an outer, and an inner plate portion to realize super-lightweight body. Super-high durability By coating with hard almite on the surface, durability of the pulley have raised dramatically. It can easily be used for the drag racing cars that exceed 1000horse power and 10000RPM.
Designed only for each IN and EX pulleys With individual design of IN and EX, the adjustment part of both IN and EX pulley comes to its top when the engineﾕs TDC for easier valve timing adjustment

TOMEI Head Gasket - $280 shipped
Available in 1.0mm to 1.8 mm, 86.5 mm Bore

TOMEI Solid Pivot Kit - $720 shipped


In order to make cam clearance maintenance-free, and achieve operation sound reduction, hydraulic lash adjuster is adopted to SR20 engine. However, when aiming at high rotation and a high output by engine modification, it is important to improve the reliability of head parts and to make valve drive correctly as the cam profile. Accordingly, it is necessary to eliminate the function of lash adjuster. We adopt solid pivot system to enable cam clearance adjustment, while keeping total height of pivot of each cylinder fixed. Thereby, it is possible to build much precise head system in shorter time compare to the others. Moreover, improvement in reliability and the low price were realized at the same time by having reduced the number of parts.

TOMEI Oil Thermostat Killer - $49 shipped

TOMEI Head Studs Set or Main Studs Set - $499 shipped

************************** MORE PERFORMANCE ITEMS **************************

TOMEI Complere E/G 4G63 EVO7-8 MR GENESIS-1 Starting At $7500
TOMEI Complere E/G 4G63 EVO7-8 MR GENESIS-2 Starting At $11800

TOMEI 4G63 - 22 Stroker Kit Starting At $4900

85.5mm or 86.0 mm option, Piston, Full Counter Crankshaft, and Rods included


TOMEI 4G63 Full Counter Crankshaft - Starting At $4900


94mm Stroke, special piston required.
Full Counter Weight - By preparing counter weight on every cylinder, making inertia power balance so that bent of the crankshaft is suppressed and vibration and friction is reduced, while the reliability of bearing is raised. (Applied to all engine model excluding CA)
Route Lubrication Two- Route oil supply from two journals secures crankpin an enough amount of oil supply. Moreover, X shape oil passage enables supplying oil using the centrifugal force of a crankshaft; reliability of the oil supply at high RPM is improved. Furthermore, and resistance of oil flow is reduced by giving a modification on oil hole exit. (Applied to all engine model excluding CA)
Balance Rate - Counter weight has its original shape that is designed with theoretical analysis, to secure the proper rate of balance (rate which negates the inertia power of a reciprocating movement) while reducing its weight.
Edge Shape Designed - with Hydrodynamics At high RPM, counterweight rotates at more than 200km/h inside the crankcase through the oil and air. We designed the edge shape of the counterweight hydro-dynamically sharp so that less resistance will occur even at high rotation. (Applied other than CA)
Forged SCM435 Material - We selected chrome moly steel as a material (STD: regular steel) and forge it in the mold to improve the organization of crystal. As a result, metal flow is formed along with the shape of crankshaft that gives 2 times more strength to the metal than before.
WPC Finish - WPC finish to prevents pulley and pulley holder to be worn and keeps good maintenance of the engine. (Applied to RB engines)

althemean

iTrader: (5)

the mahle pistons in stock?

RavSpec

iTrader: (80)

yes in stock !

althemean

iTrader: (5)

just called to place an order....not in stock

RavSpec

iTrader: (80)

mahle piston is out of stock till next week !

althemean

iTrader: (5)

PM me if you get them in.

RavSpec

iTrader: (80)

weekend bump !

RavSpec

iTrader: (80)

weekend bump !

RavSpec

iTrader: (80)

quick bump !!

RavSpec

iTrader: (80)

quick bump .....

RavSpec

iTrader: (80)

quick bump !!!

RavSpec

iTrader: (80)

Weekend Bump^