Manley Week @ Slowboy!!!
Jun 7, 2010, 06:40 AM
#1
Manley Week @ Slowboy!!!
I must say, one thing I missed about PA this year was certainly STPR... congrats to Antione and Natalie - you two did amazing! Now to try and sell some engine parts!
“H” Beam – Economical
For the budget conscious enthusiast, we also offer our very high quality, yet economical, H-Beam design connecting rods. These are also manufactured from 4340 alloy forgings. They are fully machined, heat treated, stress relieved, shot peened, and magnafluxed. They also are built standard with 3/8” ARP 2000 bolts.
All Manley connecting rod sets, are weight matched to ± 1.5 grams, big and small end bores are final honed to a tolerance of ± .0002”, critical bend and twist attributes are held to a minimum, and exacting attention is paid to every detail by our final inspection department; thus rendering a finished product that is second to none.
This week only - $325.00 a set shipped to the lower 48 for any H beam set of connecting rods! We have had huge success (and have sold HUNDREDS of sets) with the Manley H beam up to about 600 WHP and 450-500 ft/lbs of tq. If you are making more power than this - look at the Turbo Tuff I beam connecting rod below.
Manley Performance manufactures the finest steel connecting rods in the Sport Compact industry. Our Pro Series “I” Beam is forged from 4340 aircraft quality vacuum degassed material. We utilize our proven “Turbo Tuff” design and add 3/8” ARP 2000 cap screws. All rods are properly shot peened after machining and 100% magnafluxed.
“I” Beam – Turbo Tuff
Manley Pro Series Turbo Tuff connecting rods are used by the best tuners in and outside of the United States in some of the fastest, high horsepower, heart stopping engines being produced.
If you are in search of 600 plus HP - or upwards of 700 ft/lbs of tq the Turbo Tuff I beam with ARP 2000 rod bolts are your choice. We have personally run this in our old rally car to over 500 ft/lbs of tq and in our 4G63 drag car making almost 1000 WHP. This is the highest quality connecting rod made in the USA and it can be yours this week for $700.00 a set shipped for 4cyl sets. This is a fantastic price for a killer connecting rod.
This is our kick off to Manley week - don't forget to ask about piston and bearing specials to compliment these fine connecting rods brought to you by Slowboy Racing Inc - manufactured by Manley Performance!
“H” Beam – Economical
For the budget conscious enthusiast, we also offer our very high quality, yet economical, H-Beam design connecting rods. These are also manufactured from 4340 alloy forgings. They are fully machined, heat treated, stress relieved, shot peened, and magnafluxed. They also are built standard with 3/8” ARP 2000 bolts.
All Manley connecting rod sets, are weight matched to ± 1.5 grams, big and small end bores are final honed to a tolerance of ± .0002”, critical bend and twist attributes are held to a minimum, and exacting attention is paid to every detail by our final inspection department; thus rendering a finished product that is second to none.
This week only - $325.00 a set shipped to the lower 48 for any H beam set of connecting rods! We have had huge success (and have sold HUNDREDS of sets) with the Manley H beam up to about 600 WHP and 450-500 ft/lbs of tq. If you are making more power than this - look at the Turbo Tuff I beam connecting rod below.
Manley Performance manufactures the finest steel connecting rods in the Sport Compact industry. Our Pro Series “I” Beam is forged from 4340 aircraft quality vacuum degassed material. We utilize our proven “Turbo Tuff” design and add 3/8” ARP 2000 cap screws. All rods are properly shot peened after machining and 100% magnafluxed.
“I” Beam – Turbo Tuff
Manley Pro Series Turbo Tuff connecting rods are used by the best tuners in and outside of the United States in some of the fastest, high horsepower, heart stopping engines being produced.
If you are in search of 600 plus HP - or upwards of 700 ft/lbs of tq the Turbo Tuff I beam with ARP 2000 rod bolts are your choice. We have personally run this in our old rally car to over 500 ft/lbs of tq and in our 4G63 drag car making almost 1000 WHP. This is the highest quality connecting rod made in the USA and it can be yours this week for $700.00 a set shipped for 4cyl sets. This is a fantastic price for a killer connecting rod.
This is our kick off to Manley week - don't forget to ask about piston and bearing specials to compliment these fine connecting rods brought to you by Slowboy Racing Inc - manufactured by Manley Performance!
Last edited by SBR INC; Jun 7, 2010 at 06:43 AM.
Jun 8, 2010, 06:33 AM
#2
Mitsubishi (4G63 and 4B11) pistons for your 2.0l, 2.3l, or monster 2.4l builds in many compression ratios from 8.5:1 to E85 friendly 10:1 compression. Custom pistons and HD pin upgrades available. Most 4 cyl sets on sale from only $465.00 a set shipped for a piston set that can take all the abuse you can throw at it!
Manley pistons are machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life. Perfect ring groove to skirt squareness is achieved through our unique “one fixturing” manufacturing method that assures maximum horsepower. Round wire locks, tool steel wrist pins, and rings are included with every set at no additional charge.
Forging
2618 alloy for maximum high temperature strength and fatigue resistance.
Attributes
“Contour forgings” provide the optimum balance between strength and weight with no grain-interrupting internal milling.
Proprietary multi-step top ring groove machining process assures optimum control of the groove’s size, geometry, flatness, and finish.
All final turning is performed in one fixturing resulting in complete squareness of rings to the cylinder wall.
Federal Form-Scan gauging validates ideal skirt indexing to pinhole and skirt-to-skirt polarity.
Value – added features such as a pressure balance groove included in all series.
Precise pinhole machining results in an exact compression distance as well as precise lock ring groove spacing, size, and concentricity.
Manley Sport Compact Platinum series pistons come complete with pistons, rings, pins, and locks
Call us today - 321.304.4907 for engine building savings all week long!
Manley pistons are machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life. Perfect ring groove to skirt squareness is achieved through our unique “one fixturing” manufacturing method that assures maximum horsepower. Round wire locks, tool steel wrist pins, and rings are included with every set at no additional charge.
Forging
2618 alloy for maximum high temperature strength and fatigue resistance.
Attributes
“Contour forgings” provide the optimum balance between strength and weight with no grain-interrupting internal milling.
Proprietary multi-step top ring groove machining process assures optimum control of the groove’s size, geometry, flatness, and finish.
All final turning is performed in one fixturing resulting in complete squareness of rings to the cylinder wall.
Federal Form-Scan gauging validates ideal skirt indexing to pinhole and skirt-to-skirt polarity.
Value – added features such as a pressure balance groove included in all series.
Precise pinhole machining results in an exact compression distance as well as precise lock ring groove spacing, size, and concentricity.
Manley Sport Compact Platinum series pistons come complete with pistons, rings, pins, and locks
Call us today - 321.304.4907 for engine building savings all week long!
Jun 9, 2010, 07:04 AM
#3
Manley Performance Sport Compact stainless steel valves utilize our exceptional “Race Series” alloy and are manufactured to the highest quality standards.
Manley valves are designed to outflow and outperform all others even in the most severe environments. Manley stainless valves feature gorgeous yet durable chrome stems, swirl polished under heads, fully hardened tips, completely machined combustion faces, closely controlled margin heights, and exact stem to seat concentricity to render a finished product that is unsurpassed.
Manley intake valves typically are built with our original “Pro-Flo” design which reduces the stem diameter in the fillet area for increased airflow but also less valve weight.
In certain specific applications, Manley offers our “Extreme Duty” exhaust material. Our “Extremealloy” alloy offers more hot hardness and high temperature strength than our competitors’ offerings. This alloy is ideal for extremely high boosted applications where the exhaust gas temperatures reach what seem like unthinkable levels.
Manley stainless valves are suitable for all applications ranging from the mild street performer to the jaw dropping 1000+ horsepower race cars competing at the drag strip or drifting events.
Yes - you can even special order inconel exhaust valves from Manley if you must have them... just be ready to pay to play!
Hundreds of valves in stock and can ship today - order valves and get a Manley spring and retainer kit for only cost plus 10% when you mention this post!
Manley valves are designed to outflow and outperform all others even in the most severe environments. Manley stainless valves feature gorgeous yet durable chrome stems, swirl polished under heads, fully hardened tips, completely machined combustion faces, closely controlled margin heights, and exact stem to seat concentricity to render a finished product that is unsurpassed.
Manley intake valves typically are built with our original “Pro-Flo” design which reduces the stem diameter in the fillet area for increased airflow but also less valve weight.
In certain specific applications, Manley offers our “Extreme Duty” exhaust material. Our “Extremealloy” alloy offers more hot hardness and high temperature strength than our competitors’ offerings. This alloy is ideal for extremely high boosted applications where the exhaust gas temperatures reach what seem like unthinkable levels.
Manley stainless valves are suitable for all applications ranging from the mild street performer to the jaw dropping 1000+ horsepower race cars competing at the drag strip or drifting events.
Yes - you can even special order inconel exhaust valves from Manley if you must have them... just be ready to pay to play!
Hundreds of valves in stock and can ship today - order valves and get a Manley spring and retainer kit for only cost plus 10% when you mention this post!
Jun 10, 2010, 07:08 AM
#4
Manley Forged and Billet crank shafts for the 4G63!!!!!
New Forged Crankshafts!!!
P/N: 190110 - 94mm (not avail until 2010) - NA
P/N: 190120 - 100mm - 37lbs
New Billet Crankshafts!!!
P/N: 190110B - 94mm - 36lbs
P/N: 190120B - 100mm - 38lbs
[/COLOR]
Forged crankshafts $599.00 shipped! [B]
Billet crankshafts $1299.00 shipped!
Add a set of Manley rods and a set of Manley pistons from $799.00 to make the perfect rotating assembly!
New Forged Crankshafts!!!
- Premium heat treated forgings
- Special teardrop, diagonal oiling features not found on stock OEM style crankshaft.
- Better performance at High RPM
- Stress Relieved & Shot Peened
- Nitrided
- Magnafluxed
P/N: 190110 - 94mm (not avail until 2010) - NA
P/N: 190120 - 100mm - 37lbs
New Billet Crankshafts!!!
P/N: 190110B - 94mm - 36lbs
P/N: 190120B - 100mm - 38lbs
[/COLOR]
- 4340 Billet
- Multi-step heat treatment process
- Stress relieved and shot peened
- Nitrided
- Magnafluxed
- Knife Edged
Forged crankshafts $599.00 shipped! [B]
Billet crankshafts $1299.00 shipped!
Add a set of Manley rods and a set of Manley pistons from $799.00 to make the perfect rotating assembly!
Last edited by SBR INC; Jun 10, 2010 at 07:12 AM.
Jun 10, 2010, 07:19 AM
#5
Manley Forged and Billet crank shafts for the 4G63!!!!!
New Forged Crankshafts!!!
P/N: 190110 - 94mm (not avail until 2010) - NA
P/N: 190120 - 100mm - 37lbs
New Billet Crankshafts!!!
P/N: 190110B - 94mm - 36lbs
P/N: 190120B - 100mm - 38lbs
Forged crankshafts $599.00 shipped!
Billet crankshafts $1299.00 shipped!
Add a set of Manley rods and a set of Manley pistons from $799.00 to make the perfect rotating assembly!
New Forged Crankshafts!!!
- Premium heat treated forgings
- Special teardrop, diagonal oiling features not found on stock OEM style crankshaft.
- Better performance at High RPM
- Stress Relieved & Shot Peened
- Nitrided
- Magnafluxed
P/N: 190110 - 94mm (not avail until 2010) - NA
P/N: 190120 - 100mm - 37lbs
New Billet Crankshafts!!!
P/N: 190110B - 94mm - 36lbs
P/N: 190120B - 100mm - 38lbs
- 4340 Billet
- Multi-step heat treatment process
- Stress relieved and shot peened
- Nitrided
- Magnafluxed
- Knife Edged
Forged crankshafts $599.00 shipped!
Billet crankshafts $1299.00 shipped!
Add a set of Manley rods and a set of Manley pistons from $799.00 to make the perfect rotating assembly!
Last edited by SBR INC; Jun 10, 2010 at 07:23 AM.
Thanks SBR 