RaceComp Engineering Sale -- Cusco, Greddy, Kartboy, Kaminari and more
Nov 5, 2004 | 10:16 AM
#1
Thread Starter
Former Sponsor
iTrader: (35)
Joined: May 2004
Posts: 3,583
Likes: 6
From: Columbia, Maryland
RaceComp Engineering Sale -- Cusco, Greddy, Kartboy, Kaminari and more
Cusco GT Wing
An adjustable single wing bolt-on type using the OEM wing mounting holes prevents the need for drilling extra holes. These rear wings are made to fit on Japanese versions with production wings. Some cars may require provisions to make additional holes.
RCE-0213 Cusco GT Wing for EVO8 -- $400.00
Cusco Hood
Lighter than the factory metal hood, made of fiberglass. Also featuring reverse vents to help reduce those underhood temperatures. Hood pins are required.
RCE-0214 Cusco Hood for EVO8 -- $705.00
Kaminari EVO VIII Full Body Kit
Front Bumper is made out of High Quality Urethane, and the side skirts, and the bumper is made out of fiberglass. Comes painted and ready to install.
RCE-EVO-KAMINARIBODYKIT Kaminari EVO VIII Full Body Kit -- $1100.00
APR Performance Carbon Fiber Wind Splitter w/ Rods
Designed to combat the effects of front end lift, APR’s Carbon Fiber Wind Splitters help increase overall downforce on your car. Wind Splitter Support Rods are also available to secure the splitter to a vehicle’s front bumper.
RCE-EVO-APRWINDSPLITTER APR Performance Carbon Fiber Wind Splitter w/ Rods -- $260.00
APR Performance Evolution VIII Front Lip Canards
Carbon Fiber Canard Bumper Flaps are constructed of carbon graphite composite with aluminum leading edge. Canards increase front downforce at high speeds stabilizing the chassis during hard cornering. Found on many GT race cars, they allow you to customize your car front end downforce by either installing two flaps or creating maximum downforce with a full set of four canards.
RCE-EVO-APRCANARDS APR Performance Evolution VIII Front Lip Canards -- $165.00
Do Luck Evolution VIII Carbon Front Lip
Front Lip made from Carbon fiber.
RCE-EVO-DOLUCKFRONTLIP Do Luck Evolution VIII Carbon Front Lip -- $690.00
Kaminari Evolution VIII Reverse Cowl Hood Full Carbon Fiber
The Kaminari Reverse Carbon fiber hood is a excellent fit as well as one of the best looking aftermarket hoods for the EVO VIII.
RCE-EVO-KAMINARIHOOD Kaminari Evolution VIII Reverse Cowl Hood Full Carbon Fiber -- $820.00
APR Performance Evolution VIII Formula GT3 Carbon Fiber Mirrors
APR Formula GT3 Carbon Fiber Mirrors are designed for optimum performance, most widely used mirror on formula race cars. Feature a left to right pivot at the mirror housing with an adjustable ball stub rod to allow a very wide range of adjustment. These carbon fiber mirrors are compact aerodynamic shaped with a very low drag coefficient. Billet aluminum mounting bases are specifically designed to factory specifications for easy installation. The mirrors are only available in carbon fiber with convex lens.
RCE-EVO-APRMIRRORS APR Performance Evolution VIII Formula GT3 Carbon Fiber Mirrors -- $305.00
JDM Evolution VIII EVO 7 Taillights
These are the factory taillights that come on the EVO 7 in Japan. Get rid of the altezza look with these taillights. They are a direct bolt up and a great add on to any EVO 8.
RCE-EVO-JDMEVO7TAILLIGHTS JDM Evolution VIII EVO 7 Taillights -- $375.00
JDM Evolution VIII EVO MR Taillights
These are JDM lights from Japan. These lights will really set your EVO apart from all the others. They are a direct bolt up and a great add on to any EVO 8.
RCE-EVO-JDMMRTAILLIGHTS JDM Evolution VIII EVO MR Taillights -- $395.00
ATI Evolution VIII Gauge Pod
The ATI gauge pod will hold both 52mm and 60mm gauges. In it's stock for it is setup to house the 52mm gauges. By removing some excess plastic gauge pod will convert to hold 60mm gauges. Very simple and attractive way to show off and present you new gauges. Comes will all hardware needed for install.
RCE-EVO-ATIPOD ATI Evolution VIII Gauge Pod -- $149.99
Autometer Evolution VIII A-Pillar Gauge Pod
Holds two or three 2 1/6" (52mm) gauges. Will fit over factory a-pillar, comes cast in black, so you will need to paint to match the factory dash color.
RCE-EVO-AUTOMETER2POD Autometer Evolution VIII Double Meter A-Pillar Gauge Pod -- $80.39
RCE-EVO-AUTOMETER3POD Autometer Evolution VIII Triple Meter A-Pillar Gauge Pod -- $83.78
Speedware Evolution VIII Harness Bar
Featuring all hand built high quality construction and powder coated. This Speedware harness bar allows the use of racing harness in your EVO without adversely affecting the car's "people mover" capabilities. The resulting ride stiffens the center of the car allowing the EVO to handle much harder cornering loads. This bar allows for a secure and proper installation of a 4, 5 or 6 point harness system. The new run of Speedware bars are powder coated a dark grey color. Custom colors are available. Please contact us for more info. Will install without any modifications. The harness bar is set so that the front seats are able to recline.
RCE-EVO-SPEEDWAREBAR Speedware Evolution VIII Harness Bar -- $399.99
Greddy Evolution VIII Counterweight Shift Knob
The Greddy Counter-Weight shift knob brings true high performance to your manual transmission shifter. Being twice as heavy as most conventional shift knobs, allows for an easier lighter touch for shifts and a more precise shifting feel (13.5oz). It has a classic black-chrome finish and comes with three different colored shift badges.
RCE-EVO-GREDDYKNOB Greddy Evolution VIII Counterweight Shift Knob -- $42.00
Kartboy EVO VIII Shift Knob
For the extra bit of style and performance, add a Kartboy Shift Knob to your Kartboy Shift Lever. This computer designed and CNC turned Aluminum knob fits the hand with comfort, but allows a firm grip for crucial shifts. No set screws or cheesy adapter sleeves to add, it is internally threaded. There are two colors available, a natural clear anodize and a midnight black anodize. To top it all off, a tasteful Kartboy Shift Pattern logo is added in red, blue, yellow, or black.
RCE-EVO-KARTBOYKNOB Kartboy EVO VIII Shift Knob -- $40.00
An adjustable single wing bolt-on type using the OEM wing mounting holes prevents the need for drilling extra holes. These rear wings are made to fit on Japanese versions with production wings. Some cars may require provisions to make additional holes.
RCE-0213 Cusco GT Wing for EVO8 -- $400.00
Cusco Hood
Lighter than the factory metal hood, made of fiberglass. Also featuring reverse vents to help reduce those underhood temperatures. Hood pins are required.
RCE-0214 Cusco Hood for EVO8 -- $705.00
Kaminari EVO VIII Full Body Kit
Front Bumper is made out of High Quality Urethane, and the side skirts, and the bumper is made out of fiberglass. Comes painted and ready to install.
RCE-EVO-KAMINARIBODYKIT Kaminari EVO VIII Full Body Kit -- $1100.00
APR Performance Carbon Fiber Wind Splitter w/ Rods
Designed to combat the effects of front end lift, APR’s Carbon Fiber Wind Splitters help increase overall downforce on your car. Wind Splitter Support Rods are also available to secure the splitter to a vehicle’s front bumper.
RCE-EVO-APRWINDSPLITTER APR Performance Carbon Fiber Wind Splitter w/ Rods -- $260.00
APR Performance Evolution VIII Front Lip Canards
Carbon Fiber Canard Bumper Flaps are constructed of carbon graphite composite with aluminum leading edge. Canards increase front downforce at high speeds stabilizing the chassis during hard cornering. Found on many GT race cars, they allow you to customize your car front end downforce by either installing two flaps or creating maximum downforce with a full set of four canards.
RCE-EVO-APRCANARDS APR Performance Evolution VIII Front Lip Canards -- $165.00
Do Luck Evolution VIII Carbon Front Lip
Front Lip made from Carbon fiber.
RCE-EVO-DOLUCKFRONTLIP Do Luck Evolution VIII Carbon Front Lip -- $690.00
Kaminari Evolution VIII Reverse Cowl Hood Full Carbon Fiber
The Kaminari Reverse Carbon fiber hood is a excellent fit as well as one of the best looking aftermarket hoods for the EVO VIII.
RCE-EVO-KAMINARIHOOD Kaminari Evolution VIII Reverse Cowl Hood Full Carbon Fiber -- $820.00
APR Performance Evolution VIII Formula GT3 Carbon Fiber Mirrors
APR Formula GT3 Carbon Fiber Mirrors are designed for optimum performance, most widely used mirror on formula race cars. Feature a left to right pivot at the mirror housing with an adjustable ball stub rod to allow a very wide range of adjustment. These carbon fiber mirrors are compact aerodynamic shaped with a very low drag coefficient. Billet aluminum mounting bases are specifically designed to factory specifications for easy installation. The mirrors are only available in carbon fiber with convex lens.
RCE-EVO-APRMIRRORS APR Performance Evolution VIII Formula GT3 Carbon Fiber Mirrors -- $305.00
JDM Evolution VIII EVO 7 Taillights
These are the factory taillights that come on the EVO 7 in Japan. Get rid of the altezza look with these taillights. They are a direct bolt up and a great add on to any EVO 8.
RCE-EVO-JDMEVO7TAILLIGHTS JDM Evolution VIII EVO 7 Taillights -- $375.00
JDM Evolution VIII EVO MR Taillights
These are JDM lights from Japan. These lights will really set your EVO apart from all the others. They are a direct bolt up and a great add on to any EVO 8.
RCE-EVO-JDMMRTAILLIGHTS JDM Evolution VIII EVO MR Taillights -- $395.00
ATI Evolution VIII Gauge Pod
The ATI gauge pod will hold both 52mm and 60mm gauges. In it's stock for it is setup to house the 52mm gauges. By removing some excess plastic gauge pod will convert to hold 60mm gauges. Very simple and attractive way to show off and present you new gauges. Comes will all hardware needed for install.
RCE-EVO-ATIPOD ATI Evolution VIII Gauge Pod -- $149.99
Autometer Evolution VIII A-Pillar Gauge Pod
Holds two or three 2 1/6" (52mm) gauges. Will fit over factory a-pillar, comes cast in black, so you will need to paint to match the factory dash color.
RCE-EVO-AUTOMETER2POD Autometer Evolution VIII Double Meter A-Pillar Gauge Pod -- $80.39
RCE-EVO-AUTOMETER3POD Autometer Evolution VIII Triple Meter A-Pillar Gauge Pod -- $83.78
Speedware Evolution VIII Harness Bar
Featuring all hand built high quality construction and powder coated. This Speedware harness bar allows the use of racing harness in your EVO without adversely affecting the car's "people mover" capabilities. The resulting ride stiffens the center of the car allowing the EVO to handle much harder cornering loads. This bar allows for a secure and proper installation of a 4, 5 or 6 point harness system. The new run of Speedware bars are powder coated a dark grey color. Custom colors are available. Please contact us for more info. Will install without any modifications. The harness bar is set so that the front seats are able to recline.
RCE-EVO-SPEEDWAREBAR Speedware Evolution VIII Harness Bar -- $399.99
Greddy Evolution VIII Counterweight Shift Knob
The Greddy Counter-Weight shift knob brings true high performance to your manual transmission shifter. Being twice as heavy as most conventional shift knobs, allows for an easier lighter touch for shifts and a more precise shifting feel (13.5oz). It has a classic black-chrome finish and comes with three different colored shift badges.
RCE-EVO-GREDDYKNOB Greddy Evolution VIII Counterweight Shift Knob -- $42.00
Kartboy EVO VIII Shift Knob
For the extra bit of style and performance, add a Kartboy Shift Knob to your Kartboy Shift Lever. This computer designed and CNC turned Aluminum knob fits the hand with comfort, but allows a firm grip for crucial shifts. No set screws or cheesy adapter sleeves to add, it is internally threaded. There are two colors available, a natural clear anodize and a midnight black anodize. To top it all off, a tasteful Kartboy Shift Pattern logo is added in red, blue, yellow, or black.
RCE-EVO-KARTBOYKNOB Kartboy EVO VIII Shift Knob -- $40.00
Last edited by Myles@Racecomp; Nov 19, 2004 at 12:18 PM.
Nov 11, 2004 | 10:46 AM
#6
Thread Starter
Former Sponsor
iTrader: (35)
Joined: May 2004
Posts: 3,583
Likes: 6
From: Columbia, Maryland
Originally Posted by ex-honda
Same here. do you have the Do-Luck in stock? Also how much for the V6 for the Evo with a street setup?
thanks
thanks
Free shipping in the continental USA!
I'll have word about the Do-Luck lip any minute now.
