New DMC harness bar for the EVO in stock!!
Apr 4, 2006, 04:34 PM
#1
Newbie
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Northern California
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New DMC harness bar for the EVO in stock!!
SRM Tuning is proud to be the exclusive distributor of DMC harness bars for the Lancer Evolution. The DMC harness bar is far superior (engineering and craftsmanship) to similar products currently available on the market. This part was designed and hand built with pride in Northern California!
• TIG welded construction (hand/not robotic)
• Camera mount
• Low-profile harness stays (to keep shoulder harness in place)
• Manufactured from 4130 CrMo tubing
• Non-obtrusive design allows for rear passenger leg room
• Durable powdercoated finish
• Complete “bolt-in” design, no cutting or drilling
Special introductory pricing $389.00 + shipping
Sparco/Schroth Harnesses available:
4pt: $189.00, 2" webbing / 5pt: 229.00 6pt: 235.00 (5 and 6 point harness are 3" webbing and FIA approved). The lap belts are available in either "pull-up" or "pull-down". Harness pads available as well (2 or 3"). All belts and harness pads available in Red/Black/Blue only.
PM, call or e-mail with any questions.
(415) 454-7682
M-F 9-6 PST
• TIG welded construction (hand/not robotic)
• Camera mount
• Low-profile harness stays (to keep shoulder harness in place)
• Manufactured from 4130 CrMo tubing
• Non-obtrusive design allows for rear passenger leg room
• Durable powdercoated finish
• Complete “bolt-in” design, no cutting or drilling
Special introductory pricing $389.00 + shipping
Sparco/Schroth Harnesses available:
4pt: $189.00, 2" webbing / 5pt: 229.00 6pt: 235.00 (5 and 6 point harness are 3" webbing and FIA approved). The lap belts are available in either "pull-up" or "pull-down". Harness pads available as well (2 or 3"). All belts and harness pads available in Red/Black/Blue only.
PM, call or e-mail with any questions.
(415) 454-7682
M-F 9-6 PST
Apr 10, 2006, 09:29 PM
#2
Newbie
iTrader: (1)
Join Date: Aug 2003
Location: In the garage 24/7
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
All I have to say is this is a top quality piece. Fitment is perfect. Instructions are easy to follow and best of all your passengers still have leg room in the rear and they don't have to worry about banging their knees when getting in and out. As for Srm Tuning they are great guys and they have even better customer service. Thanks for the great Harness bar and seatbelts SRM Tuning, lookin forward to doing much more business with you guys.
Trending Topics
May 2, 2006, 01:27 PM
#11
Newbie
Thread Starter
iTrader: (3)
Join Date: Aug 2005
Location: Northern California
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
11-12 LBS. Including hardware. I'll see if I have another photo shot from the front of the car. I was mainly interested in showing the quality of the welds/construction and fit of the bar more than anything else. Thanks for checking it out!
May 2, 2006, 01:51 PM
#13
Evolving Member
iTrader: (4)
Join Date: Dec 2005
Location: 2-5-Third
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Z1 Performance
just some interesting facts about their stuff:
Specializes in air holding, heat sealable, and polyurethane coated and laminated fabrics.
U.S. Coast Guard approved fabrics for life rafts and inflatable life jackets. EN 396 approved life jacket fabric for European market. U.S. Navy approved fabrics for military rafts
Takata is also the largest OE supplier of seatbelts and airbags to the Japanese manufacturers. You are talking a HUGE global company that manufacturers everything from front and side airbags to the clocksprings on a steering wheel, and steering wheels themselves.
The harnesses also meet all FIA 8853 and 8854 standards.
And yes, I've run 10's in one of my cars, with Takata's, and have never had an issue at the track...have also run numerous track days with them as well in a different car, and in several customer cars
Specializes in air holding, heat sealable, and polyurethane coated and laminated fabrics.
U.S. Coast Guard approved fabrics for life rafts and inflatable life jackets. EN 396 approved life jacket fabric for European market. U.S. Navy approved fabrics for military rafts
Takata is also the largest OE supplier of seatbelts and airbags to the Japanese manufacturers. You are talking a HUGE global company that manufacturers everything from front and side airbags to the clocksprings on a steering wheel, and steering wheels themselves.
The harnesses also meet all FIA 8853 and 8854 standards.
And yes, I've run 10's in one of my cars, with Takata's, and have never had an issue at the track...have also run numerous track days with them as well in a different car, and in several customer cars
The harness bar looks great IMHO. I'm also wondering if it allows us to move the seat back further then the sparco harness.
May 2, 2006, 01:55 PM
#14
Originally Posted by Cloud
The harness bar looks great IMHO. I'm also wondering if it allows us to move the seat back further then the sparco harness.
May 2, 2006, 02:39 PM
#15
Evolved Member
iTrader: (18)
Join Date: Apr 2006
Location: CT
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
is this fairly easy to remove for rear passengers? I know you don't really have to but I will probably want to for safety...if it is removable, how long would it take to do so? thanks...looks great btw