*New* Spark Tech NonCDI Sequential
#35
Evolved Member
iTrader: (9)
Yes! I have been working out the calibration and tuning my car which have found some interesting findings. I've also been working on 2 Supra's now running Series 2 that I have converted from Series 1 and I retuned an Evo9 this past weekend on Series2. It went from 360hp to right about 425hp at nearly the same boost level. Everything was improved on that car. Needless to say I've been busy!
As it sits right now my car is running very well again. Using a virtual dyno it has graphed out at 550awhp which is down some from Series 1 but I lowered the boost a little from Series 1 as the EMS's read "30psi" at different boost levels... AEM says to believe the Series 2 so I'll go with that for the time being. I'm sure if I bumped the boost the 2psi difference I'm seeing my numbers would at least match what I had previously made.
As it sits right now my car is running very well again. Using a virtual dyno it has graphed out at 550awhp which is down some from Series 1 but I lowered the boost a little from Series 1 as the EMS's read "30psi" at different boost levels... AEM says to believe the Series 2 so I'll go with that for the time being. I'm sure if I bumped the boost the 2psi difference I'm seeing my numbers would at least match what I had previously made.
Last edited by itzwolf; Aug 26, 2010 at 10:58 AM.