Will 925 battery set-up still work with a short route Upper Intercooler pipe like AMS, Bushur or JM Fab ?

 

I want to say YES, it should clear since our 925 setup is only 3/4" wider than our PC680 setup, measuring from the driver side shock tower toward the motor.

MrC

 

I checked the pics out On 925 is it OK battery is tilted like that for a long periods of time

 

The pc925 is designed to be mounted in any orientation see specs below:

Odyssey design:

• Rugged Drycell sealed design
• Military grade
• Vibration resistant
• 60% more starting power
• Deep discharge reserve power
• 2 year storage life
• 8-12 year design life
• Can be mounted in any orientation

MrC

 

I`m convinced, placing my order soon. Thank you guys

 

Thank you.

MrC

 

BUMP Potential customer

 

Is this a 1/8"NPT thread on the manifold

 

Hello - What is your suggested vaccum source for the vaccum manifold you have for sale? I assume it is fed from one of the larger bungs on the left or right side? Thanks!

 

Vacuum blocks are fed into the 1/4" fitting on either side of the block from the 1/4" fitting atop the intake manifold. Outlet ports are 1/8".

 

Gotcha - What does the 1/4" fitting on the intake manifold run to, normally ? Thanks!

 

Thank you guys for working out the deal with me Manifold looks great. Can`t wait to put it on and post some pics and results. FiD rules cheers

 

BUMP Mani and everything else looks great. It`s going on the car next week. Still on stock cams and turbo hopefully with your design I won`t loose to much spool. great job
[IMG] By wally7714 at 2011-01-30[/IMG]

By wally7714 at 2011-01-30

By wally7714 at 2011-01-30

 

UPDATE. PICS Manifold after installation and after break in
By wally7714 at 2011-03-06
By wally7714 at 2011-03-06

and this is after 2000 miles finished product
By wally7714 at 2011-03-06
By wally7714 at 2011-03-06
By wally7714 at 2011-03-06


Going on a dyno in one week. Install was very smooth without popping a turbo out. Fit and finish perfect. Without a dyno I can say I didn`t loose almost any spool and anybody who is interested how much can you gain with just this manifold stay in touch I`ll post some numbers soon. product highly recommended

 

Thanks for posting the pics of your car--BTW, very clean car and engine bay. Looking forward to seeing your dyno numbers.

MrC