Defi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect.

Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.

Defi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect.

Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.

This is a six-in-one gauge-type UEGO controller.

AEM’s Gauge-Type Wideband UEGO Controller features an LED readout and sweeping LED “needle” that changes colors as AFR changes from rich to lean. The unit’s 52mm (2-1/16”) gauge housing fits in most gauge pods and can be remotely mounted virtually anywhere.

No laptop required for monitoring!

Key features of the AEM Gauge-Type UEGO Controller:

* 24 Color-coded LED display lights provide immediate reference to engine’s air/fuel ratio (AFR) or Lambda (11.0:1 to 17.0:1)

* Integrated three-digit display reveals AFR or Lambda in real time (10.0:1 to 18.5:1)

* User-selectable 0-5v analog output included for use with data loggers and most programmable engine management systems

* Switch between AFR or Lambda readout with a twist of a switch (included face plate change is required for proper readout)

* Included black and silver bezels, black and white AFR gauge faces and black Lambda gauge face allow you to personalize the look of your gauge!

* Quick-Connect system eases installation by allowing users to mount the gauge and sensor wiring separately

* Ideal AFR monitoring tool for carbureted applications and engine dynamometers

* Does not oscillate AFR like narrow band sensors

* Serial data stream included for output of AFR (RS 232)

* Accurate to 0.1 AFR

* Bosch UEGO sensor included

The AEM Tru-Boost Boost Gauge/Controller combination is a mult-featured system for simplified, comprehensive boost control. Packaged within a 52mm gauge are a 29psi capable boost controller, peak-memory boost gauge. Other features include overboost alarm and overboost shutdown, wastegate delay for faster spool up, and a driver for an external warning lamp.

NOTE: This unit includes black and silver bezels and black and white faceplates for simple color selection and easy matching to other AEM gauges (i.e. serial gauge, UEGO, etc.)

Features:

* 52mm (2 1/16") Complete stand-alone boost controller gauge
* On-board pressure sensor included for boost levels up to 29 PSI
* Two user selectable units
* Peak boost memory
* User selectable over boost alarm with overboost shutdown
* User scaleable bar graph display
* User selectable waste gate delay for quick turbo spool
* External warning lamp driver
* No external interface required for programming
* Easy to install harness allows for quick and easy installation
* Boost hose and fittings included for easy hookup to on-board pressure sensor
* Multi-Bezel system: includes silver and black bezels, white and black face plates