installed vortex generator fins
Nov 25, 2004, 01:51 PM
#17
Evolved Member
iTrader: (17)
Join Date: Feb 2003
Location: Vegas
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the pictures looks really good. Does anyone have the Vortex Generator with a Perrin attenna? If so how do they work together? I'm sure it's no different, but I just want to make sure.
Nov 25, 2004, 01:59 PM
#18
Gold Sponsor
iTrader: (143)
Join Date: Jun 2003
Location: Brighton, Michigan
Posts: 2,276
Likes: 0
Received 0 Likes
on
0 Posts
lil'evil_evo - It will work with the perrin shorty antenna, see the link below for pictures with the perrin short & vortex generator.
http://www.lancershop.com/customer/p...tid=112&cat=24
http://www.lancershop.com/customer/p...tid=112&cat=24
Nov 27, 2004, 09:15 PM
#20
Evolved Member
iTrader: (17)
Join Date: Feb 2003
Location: Vegas
Posts: 5,424
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LancerShop.com
lil'evil_evo - It will work with the perrin shorty antenna, see the link below for pictures with the perrin short & vortex generator.
http://www.lancershop.com/customer/p...tid=112&cat=24
http://www.lancershop.com/customer/p...tid=112&cat=24
Apr 10, 2005, 04:46 PM
#21
Biggest problem with this install is popping the roof drip moulding up cleanly. I was able to pop it fairly easily, but noticed some issues when I got up to the roof itself. The gray colored clips along the back window came off easily. However, I noticed at least one gave me a problem on the passenger side, and it broke slightly. All the gray clips stayed on the car.
The biggest problems were with the white clips that begin up on the roof portion of the moulding. While the diagrams and pics have shown these clips remaining on the car when you pop the moulding, at least 3 of 4 of mine came off with the moulding. Again, one on the passenger side busted but stayed on the car - with about 1/3 of it just coming right off from the rest of the clip - I had to toss the piece that broke off. I was able to slide the white clips on the moulding in order to get them to line up with the notches in the vortex generator's tabs.
LUCKILY, the moulding seemed to pop right back on when I was finished. I found pressing on the moulding with finger pressure didn't snap it in - it was when I used my clenched fist like a rubber mallet that I heard them finally pop in. All seems good now, but I wouldn't be surprised if someday the passenger side moulding needs new clips to keep it down.
Good thread and pics, folks!
The biggest problems were with the white clips that begin up on the roof portion of the moulding. While the diagrams and pics have shown these clips remaining on the car when you pop the moulding, at least 3 of 4 of mine came off with the moulding. Again, one on the passenger side busted but stayed on the car - with about 1/3 of it just coming right off from the rest of the clip - I had to toss the piece that broke off. I was able to slide the white clips on the moulding in order to get them to line up with the notches in the vortex generator's tabs.
LUCKILY, the moulding seemed to pop right back on when I was finished. I found pressing on the moulding with finger pressure didn't snap it in - it was when I used my clenched fist like a rubber mallet that I heard them finally pop in. All seems good now, but I wouldn't be surprised if someday the passenger side moulding needs new clips to keep it down.
Good thread and pics, folks!
Apr 11, 2007, 10:13 AM
#23
