D 1st Yellow03 EVO with JDM EVO9 front/rear bump!! (10 Pics)
Jan 30, 2006, 05:29 PM
#27
Evolved Member
iTrader: (7)
Join Date: Jul 2004
Location: NorCal
Posts: 1,335
Likes: 0
Received 0 Likes
on
0 Posts
If I ever got a yellow evo, which I was close to doing, this is exactly how I would want it to look (except for maybe the headlights). I'm surprised this thread isn't getting more attention because your car is HOT!
Jan 30, 2006, 05:37 PM
#29
Originally Posted by snoop
I liked the yellow EVO9 pictures in SCC so much that i decided to convert my 03 EVO8 to JDM EVO9 look since there is no more yellow 
I just wanted a car that was different and unique but wanted to get parts that fit good which why I chose Mitus parts.
I plan to get the EVO9 tails and maybe the ralliart CF lip.
Thanks to Tom @Gruppe-S for rear bumper
Install pics
I had to cut the bumper with utility knife since I wanted to keep my HKS Exhaust. The AMuse exaust fit perfect but I didn't want to pay more than money or go to an exhaust shop.
Here is area I cut next to my muffler
https://www.evolutionm.net/forums/at...chmentid=83388
I also had to bend the license plate bracket. I removed the existing rivets and than bent each arm than re-rivited the hold frame to braces
I just wanted a car that was different and unique but wanted to get parts that fit good which why I chose Mitus parts.
I plan to get the EVO9 tails and maybe the ralliart CF lip.
Thanks to Tom @Gruppe-S for rear bumper
Install pics
I had to cut the bumper with utility knife since I wanted to keep my HKS Exhaust. The AMuse exaust fit perfect but I didn't want to pay more than money or go to an exhaust shop.
Here is area I cut next to my muffler
https://www.evolutionm.net/forums/at...chmentid=83388
I also had to bend the license plate bracket. I removed the existing rivets and than bent each arm than re-rivited the hold frame to braces
