Evo pictures of NT03's here please
#216
Evolved Member
iTrader: (47)
I am trying to confirm fitmet on spacers, fender rolling, and the concave/convex look of these rims. I plan to run a 245 R6; which I hear is more like a big 255. Please correct me if misstated below:
NT03+M 18x9.5 +27mm --> This is the 'deep-dish' type look
10-15mm front spacers needed
265 - fit; probably need to roll rear fenders
275 - a lot of rolling and molesting
NT03+M 17 x 9.5 +38 --> This is the FWD basket 'pushed-out' look
255 no issues
275 - rear minor fender rolling
NT03+M 18x9.5 +27mm --> This is the 'deep-dish' type look
10-15mm front spacers needed
265 - fit; probably need to roll rear fenders
275 - a lot of rolling and molesting
NT03+M 17 x 9.5 +38 --> This is the FWD basket 'pushed-out' look
255 no issues
275 - rear minor fender rolling
#218
Evolved Member
iTrader: (32)
Can't comment on the 17's as I don't have them.
NT03+M 18x9.5 +27mm --> This is the 'deep-dish' type look
-10mm MINIMUM front spacers needed. I would recommend 12 or 15mm spacer for more caliper clearance.
265/35 - fit, WILL require heaving rolling front and ROLL/PULL on rear.
275/40's - Dont fit unless you cut an inch out of your quarter and fender.
I run the +38 NT03's 18x9.5's... I would recommend getting the +38's because you won't have to destroy your quarters to get them to fit with a 265 size tire. The difference in the face of the wheel (lip/concavity) is not noticeable...if there actually is a difference...I can't tell.
NT03+M 18x9.5 +27mm --> This is the 'deep-dish' type look
-10mm MINIMUM front spacers needed. I would recommend 12 or 15mm spacer for more caliper clearance.
265/35 - fit, WILL require heaving rolling front and ROLL/PULL on rear.
275/40's - Dont fit unless you cut an inch out of your quarter and fender.
I run the +38 NT03's 18x9.5's... I would recommend getting the +38's because you won't have to destroy your quarters to get them to fit with a 265 size tire. The difference in the face of the wheel (lip/concavity) is not noticeable...if there actually is a difference...I can't tell.