sup guys, ive searched and have probably missed it, but quick question

18x9.5+27 lowered on swift springs...any issues?

 

Yes they rubbed. I never tried rolling the front though.

 

whats the specs on these? 18x?

 

I bet they are 18x9.5 +15

 

damn guess ill just go with 18x9 bc i refuse to roll my fenders

 

mine..

 

They don't make 18x9 NT03's..


And even with a 9" wide rim, you would have to roll fenders in the rear if you plan on dropping the car.

 

well i guess no nt03s then haha

 

Yes sir! 18x9.5 +27mm. 10mm Spacers all around.

27mm!

 

IMPORTANT INFO:

If you run 285 wide R comps or... wide R comps for that matter with the +40 offset 18x9.5 Enkei's you're going to need a 3mm spacer in the rear! You will also need to trim the casting flash on the rear trailing arm and trim the thin metal brackets for the emergency brake line and ABS wiring.

The tire under deflection rubs the brackets and the trailing arms. The little metal tabs protrude and are a sharp surface that cuts into your tire very proficiently! The trailing arm casting flash also takes off a bit of tire. I would recommend trimming these brackets and filing/grinding down the casting flash when these wheels/tires are installed on any Evo... its a nice safety precaution.

pics coming soon!

 

Enkei does make NT03 rims in 18x9 +35 offset.

There is no NT03 +M in 18x9 though.

 

Interesting... what's the +M mean?

 

The rims should be here Friday. I should be able to get them mounted by Monday. I already have my ARP extended studs, open ended lug nuts, H&R 15mm spacers and SS brake lines ready to be installed.

 

can't see... but ... BLACK NT03's....

 

what front lip is that? Must have